Boreholes give precise information at single points, but ground conditions can change dramatically between them. Geophysical surveys map the ground continuously, so geotechnical site investigations can find hazards that boreholes alone would miss. This article explains how the two work together.
What geophysics adds
- Coverage: continuous lines or grids rather than isolated points.
- Targeting: identifies anomalies where boreholes should be drilled.
- Interpolation: extends borehole information across the site.
- Properties: measures stiffness, resistivity and density directly.
- Speed and cost: large areas surveyed quickly.
Matching method to problem
| Problem | Suitable methods |
|---|---|
| Depth to bedrock | Seismic refraction, MASW, ERT |
| Ground stiffness and seismic class | MASW, downhole seismic |
| Cavities in limestone or gypsum | ERT, microgravity, GPR (shallow) |
| Faults and fissures | ERT, seismic, magnetics |
| Buried channels and soft zones | ERT, MASW |
| Utilities and shallow obstructions | GPR, EM locators, magnetics |
| Rippability | Seismic refraction |
| Groundwater and salinity | ERT, EM |
Where geophysics fits in the investigation
- Desk study identifies likely hazards.
- Geophysical survey maps the site and highlights anomalies.
- Boreholes and trial pits are placed on representative ground and anomalies.
- Integrated interpretation builds the ground model.
- Further targeted work if anomalies remain unexplained.
BS 5930 recognises geophysics as part of a well-planned investigation.
Local examples
- Mombasa and coastal sites: ERT and microgravity to detect cavities in coral limestone. See cavity detection surveys.
- Nakuru and Rift Valley: mapping faults and fissures before construction. See fault detection surveys.
- Road corridors: refraction for rock and rippability along cuttings.
- High-rise buildings: MASW for Vs30 and stiffness. See Vs30.
Getting good results
- Define the question clearly before choosing methods.
- Test conditions with a trial line where uncertain.
- Run lines across expected features, not along them.
- Calibrate with at least some boreholes.
- Report uncertainty and limitations honestly.
Common misconceptions
- Geophysics does not “see” soil types directly; it measures physical properties.
- Every method has depth and resolution limits.
- A clear result in one setting may not apply elsewhere.
See limitations of geophysical surveys.
How Quantum Geoconsultants can help
We integrate geophysics, drilling and laboratory testing in a single investigation. See geophysical surveys for construction, geotechnical surveys and what a site investigation involves.
Frequently asked questions
Can geophysics replace boreholes?
No. Geophysics complements boreholes by mapping the ground between them, but boreholes are needed to confirm materials and obtain samples for testing.
Which geophysical methods are used in site investigation?
Common ones are ERT, seismic refraction, MASW, GPR, magnetics and microgravity, chosen to suit the target and site.
When should geophysics be carried out?
Ideally early, after the desk study, so results can guide where boreholes are placed.
📡 Request a geophysical survey quote
The cost of a geophysical survey depends mainly on the area or length of survey lines, the methods and depth of investigation needed, and site access. Tell us about your project and we will propose a survey design and quotation.
We reply with a proposed survey design and quotation. Prices are not listed online because every site and target is different.
Plan your geophysical survey
Tell us your site, target and depth of interest. We will recommend the right methods and send a survey design and quotation.