A cavity detection survey in Mombasa checks the coral limestone beneath a site for hidden voids before you build. At the coast, a cavity under a footing can lead to sudden settlement or a sinkhole, so screening the ground is one of the best investments a developer can make.
Why cavities form under Mombasa and the coast
Mombasa Island and the coastal strip are built on young coral limestone, calcarenites and sands. Rainwater and groundwater slowly dissolve limestone, forming channels and voids. Research reports that limestone units in the area are karstified, with many caves between Mombasa and Kilifi. Loose sands at the surface can also wash into voids, forming sinkholes.
How we detect cavities
- Desk study of geology and nearby sinkhole or cave records.
- ERT survey across the footprint: air-filled voids show high resistivity, clay- or water-filled voids low resistivity.
- Seismic or MASW where needed, to spot low-velocity zones.
- Probe drilling and rotary coring at anomalies and under key columns to confirm, size and log any void.
- Report with a cavity map and foundation recommendations.
If a cavity is found
- Grout or fill the cavity with concrete or cement grout
- Bridge it with a stiff raft or ground beams
- Take piles through it into sound limestone
- Control surface water so sands do not wash into voids
Areas we cover
Mombasa Island, Nyali, Bamburi, Shanzu, Kisauni, Likoni, Mtwapa, Kilifi, Malindi, Watamu, Diani and Ukunda. See also our geotechnical surveys in Mombasa, Kilifi and Kwale.
Cavity detection survey cost
The cost depends mainly on the site area, the number of survey lines and probe holes and access.
Ask us for a quote. Send your site location and project details for a quotation.
Frequently asked questions
Are there cavities under Mombasa?
Mombasa and the coast are built on coral limestone, and research reports that limestone units between Mombasa and Kilifi are karstified, with many caves. Not every site has cavities, which is why each site should be screened before building.
How do you detect cavities?
We combine geophysics (mainly electrical resistivity tomography and seismic methods) to screen the whole site with probe drilling and rotary coring to confirm and size any voids found.
What happens if a cavity is found?
Options include grouting or filling the cavity, bridging it with a stiff raft or ground beams, or taking piles through it to sound rock. The right choice depends on its size, depth and the structure.
How much does a cavity detection survey cost?
It depends on the site area, the number of survey lines and probe holes, and access. Contact us for a quotation.
References and further reading
- Karstified limestones and caves between Mombasa and Kilifi (Goldschmidt Conference abstract, 2025)
- Coastal geology and stratigraphy of the Mombasa area (KMFRI, VLIZ repository)
- Zohdy A. A. R., Eaton G. P. and Mabey D. R. Application of surface geophysics to ground-water investigations (USGS Techniques of Water-Resources Investigations, Book 2, Chapter D1)
- Mandatory soil test looms for developers before construction (The Standard)
📡 Request a geophysical survey quote
The cost of a geophysical survey depends mainly on the area or length of survey lines, the methods and depth of investigation needed, and site access. Tell us about your project and we will propose a survey design and quotation.
We reply with a proposed survey design and quotation. Prices are not listed online because every site and target is different.
Plan your geophysical survey
Tell us your site, target and depth of interest. We will recommend the right methods and send a survey design and quotation.