A hydrogeological survey in Kenya is the first and most important step towards a successful borehole. It tells you where to drill, how deep to go and what kind of water to expect, and its report is required by the Water Resources Authority before you can drill. This guide explains how a survey works, what you receive and what affects the cost.
Whether you call it a borehole survey, a groundwater survey, a water survey or borehole siting, it is the same study: a hydrogeological survey that finds the best place and depth to drill in Kenya. Clients searching for a borehole survey in Kenya get exactly this service from Quantum Geoconsultants, carried out by qualified hydrogeologists and accepted for WRA permit applications.
What is a hydrogeological survey?
A hydrogeological survey is a scientific study of the ground beneath a site to find out whether groundwater is present, where it is, how deep it lies and how much a borehole could reasonably yield. It combines a desk study of geology and existing boreholes, a site visit, and geophysical measurements taken at the surface.
The survey ends with a report that recommends the best drilling point, the expected depth and likely water quality, and supports your permit application to the Water Resources Authority (WRA).
Why a survey matters in Kenya's geology
In most of Kenya, groundwater does not sit in an underground lake. It is held in openings within rock, and these are invisible from the surface:
- Volcanic areas (central Kenya, the Rift Valley, the highlands): water is held in fractures and weathered zones and along the boundaries between lava flows.
- Basement areas (granites and gneisses across eastern, western and northern Kenya): water is held in the weathered zone and in fractures, and yields are usually lower.
- Sedimentary areas (the coast and the north-east): water is in the pores and fractures of sandstones and limestones, and salty layers must be avoided.
- Coastal and river sands: water fills the spaces between grains, and at the coast it floats on top of seawater.
Because water follows fractures and layer boundaries, two boreholes only metres apart can give completely different results. The survey's job is to find the water-bearing zones before money is spent on drilling.
Survey methods we use
- Desk study: geological maps and reports, satellite imagery and records of nearby boreholes.
- Field reconnaissance: mapping rock outcrops, fractures, springs, wells and vegetation patterns on and around the site.
- Vertical Electrical Sounding (VES): a resistivity method that measures how the ground's electrical resistance changes with depth, revealing weathered zones, water-bearing layers, clays and saline water.
- Resistivity profiling: measurements along lines across the site to locate fracture zones and faults.
- PQWT S500 groundwater detection: uses the natural electric field to pick out resistivity changes with depth.
- Seismic surveys where needed, to map rock layers and structures.
Our hydrogeological survey process
- Enquiry and site details. You share your location, site size and how the water will be used.
- Desk study of the local geology and existing boreholes.
- Site visit and field mapping of rocks, fractures and water points.
- Geophysical survey using VES, resistivity profiling and PQWT, planned to suit the local geology.
- Interpretation of the data to rank the best drilling points.
- Survey report for you and for your WRA application. We can then manage the permit, drilling, test pumping and solar pump installation.
What the survey report contains
- A description of the site's geology and how groundwater occurs there.
- The geophysical results with their interpretation.
- Recommended drilling point(s), marked with GPS coordinates.
- Expected depth to water-bearing zones and a recommended drilling depth.
- Expected yield range and likely water quality issues, such as fluoride or salinity.
- Recommendations on borehole design, casing and screening.
What affects the cost of a hydrogeological survey?
The cost of a hydrogeological survey in Kenya depends mainly on the area to be surveyed. A single residential plot needs far less fieldwork than a large farm, an institution or a community water project looking for the best site across many acres. Other factors include:
- The size of the survey area and the number of survey points and lines needed.
- Access and distance to the site.
- The purpose and yield required: a home supply versus irrigation, industry or a wellfield.
- The geology: complex fractured rock may need more survey lines to find the best zone.
- The number of boreholes planned.
Ask for a quote: because every site is different, we do not publish fixed prices. Contact us with your location and the size of your site, and we will send a quotation for your survey.
Hydrogeological surveys in every county and major town
Choose your county or town to see its geology, what our survey looks for there and the water quality risks to check.
Frequently asked questions
How much does a hydrogeological survey cost in Kenya?
The cost depends mainly on the size of the area to be surveyed, together with how easy the site is to reach, how many survey points and lines are needed and the purpose of the borehole. Because every site is different, we do not publish a fixed price. Please contact Quantum Geoconsultants with your location and site size for a quotation.
How much does a borehole survey cost in Kenya?
A borehole survey costs the same as a hydrogeological survey because it is the same service. The price depends on the area to be surveyed, site access and the number of survey points. Contact us with your location and site size for a quotation.
Is a borehole survey the same as a hydrogeological survey?
Yes. In Kenya the terms borehole survey, groundwater survey, water survey and hydrogeological survey all describe the same study: finding where groundwater lies beneath a site and how deep to drill, with a report for the Water Resources Authority.
Is a hydrogeological survey required before drilling a borehole in Kenya?
Yes. The Water Resources Authority (WRA) requires a hydrogeological survey report prepared by a qualified hydrogeologist to support an application for authorisation to drill a borehole.
How long does a hydrogeological survey take?
Fieldwork for a single plot usually takes one to a few days, depending on the size of the area and access. The report follows once the geophysical data has been interpreted.
Can a survey guarantee that I will find water?
No survey can guarantee water, because groundwater sits in fractures and layers that cannot be seen from the surface. A good survey greatly reduces the risk of a dry or low-yield borehole by choosing the most promising point and depth.
What is the PQWT S500?
The PQWT S500 is a groundwater detector that uses the natural electric field to pick out changes in ground resistivity with depth. We use it alongside conventional resistivity soundings to locate water-bearing zones.
How large an area should be surveyed?
For a single home borehole, a survey across the plot is usually enough. Farms, institutions and water projects needing larger yields may need a wider area surveyed to find the best fracture zones. We advise on the right survey area when you contact us.
📍 Request a hydrogeological survey quote
The cost of a survey depends mainly on the size of the area to be surveyed, along with access to the site and the number of survey points needed. Tell us about your site and we will send a quotation.
We will reply with a quotation for your specific site. Prices are not listed online because every survey area is different.
Book a hydrogeological survey in Kenya
Survey cost depends on the area to be surveyed. Send us your location and site size and we will reply with a quotation.