A seismic refraction survey in Kenya is the fastest way to find out how deep rock lies across a site and how hard it is to excavate. It is widely used for buildings, roads, bridges, dams and quarries, and it is especially valuable in Kenya's basement and volcanic areas, where rock depth can change within metres.
How a seismic refraction survey works
A line of geophones is laid on the ground, and seismic waves are generated with a sledgehammer or other source at several points. Waves travel faster in denser, stiffer materials, so when they reach a faster layer, such as rock beneath soil, part of the energy is refracted along it and back to the surface. Timing the first arrivals at each geophone gives the velocity and depth of each layer. The USGS describes refraction as a standard method for mapping buried channels and depths to layers.
What seismic refraction is used for
- Depth to bedrock for foundations, piles and basements
- Rippability of rock for roads, trenches and quarries
- Thickness of weathered rock at bridge and dam sites
- Locating buried channels, faults and weak zones
- Checking depth to rock between boreholes
Seismic refraction in Kenyan ground
- Basement areas (Machakos, Kitui, Makueni, western Kenya): separates residual soil, weathered rock and fresh granite or gneiss, and helps avoid mistaking boulders for bedrock.
- Volcanic areas (Nairobi, Kiambu, the Rift): maps soft tuffs and ash over harder lava flows.
- Rift Valley (Nakuru, Naivasha, Narok): helps locate faults and buried fissures. See fault detection surveys.
Tip: refraction works best where layers get faster with depth. Where a soft layer lies beneath a hard one, we combine it with MASW or ERT.
What you receive
- Velocity sections along each survey line
- Interpreted depth to rock and weathered zones
- Rippability guidance from seismic velocities
- Recommended borehole points to confirm the interpretation
Seismic refraction survey cost in Kenya
The cost depends mainly on the total length of survey lines, the depth of investigation and site access.
Ask us for a quote. Send your site location and project details for a survey design and quotation.
Frequently asked questions
What does a seismic refraction survey measure?
It measures how fast compressional (P) seismic waves travel through each layer of the ground. Because velocity increases from soil to weathered rock to fresh rock, the results show the depth and shape of each layer along the survey line.
How deep can seismic refraction see?
Depth depends on the length of the geophone spread and the energy of the source. Typical engineering surveys investigate the upper tens of metres, which covers most foundation and excavation needs.
What is rippability?
Rippability describes whether rock can be excavated by a ripper or needs blasting or breaking. Seismic velocity is widely used as an indicator, which helps contractors price earthworks.
How much does a seismic refraction survey cost in Kenya?
It depends on the total length of survey lines, the depth required and site access. Contact us with your project details for a quotation.
References and further reading
- Zohdy A. A. R., Eaton G. P. and Mabey D. R. Application of surface geophysics to ground-water investigations (USGS Techniques of Water-Resources Investigations, Book 2, Chapter D1)
- USGS Geophysical Research and Development: gravity, magnetic, electrical, electromagnetic and seismic methods
- Barasa M. et al. (2018). Africa Groundwater Atlas: Hydrogeology of Kenya. British Geological Survey
📡 Request a geophysical survey quote
The cost of a geophysical survey depends mainly on the area or length of survey lines, the methods and depth of investigation needed, and site access. Tell us about your project and we will propose a survey design and quotation.
We reply with a proposed survey design and quotation. Prices are not listed online because every site and target is different.
Plan your geophysical survey
Tell us your site, target and depth of interest. We will recommend the right methods and send a survey design and quotation.