Get a Quote

Geotechnical Survey in Kenya

Geotechnical surveys and soil testing in Kenya: black cotton soil, Rift faults, coastal cavities, building code rules and tests. Ask for a quote.

By Quantum Geoconsultants hydrogeology teamUpdated 15 November 20264 min read
Black cotton soil: swells & shrinksFirmer weathered layerRock Core box Know your ground before you build

A core drill recovers soil and rock samples beneath a planned building, revealing problem ground such as swelling black cotton clay.

A geotechnical survey in Kenya (also called a geotechnical investigation, site investigation or soil test) tells your engineer exactly what lies beneath a site and how much load the ground can safely carry. With the National Building Code 2024 now in force, soil testing is expected before construction. This guide explains Kenya's main ground hazards, the tests involved and how a survey protects your investment.

What is a geotechnical survey?

A geotechnical survey investigates the soil and rock beneath a planned structure. It combines drilling and sampling, in-situ tests on site and laboratory tests to establish the ground profile, groundwater level and engineering properties such as strength, compressibility and swelling. The results let a structural engineer choose a safe, economical foundation and avoid cracking, settlement or collapse.

Is soil testing required in Kenya?

The National Building Code 2024 (Legal Notice No. 47 of 2024) replaced the 1968 building regulations, with full enforcement from March 2025. Reports on the new code describe geotechnical assessment as a precondition for construction, used to set design parameters such as allowable bearing pressure, and the National Construction Authority can suspend non-compliant works. Before this, a study of Nairobi noted there was no requirement for site investigations, and found that wider site investigation significantly reduces the risk of foundation failure.

Kenya's main ground hazards

Tests and investigations

Core drillingContinuous soil and rock cores, logged with recovery and RQD
Standard Penetration Test (SPT)Soil strength at each depth
Dynamic Cone Penetrometer (DCP)Fast strength profiles for foundations and roads
Cone Penetration Test (CPT)Continuous profile in soft soils
Trial pitsDirect inspection and sampling of the soil layers
Plate load testDirect bearing capacity and settlement on site
Permeability testsDrainage, soakaways and excavations
Laboratory testsAtterberg limits, swell, CBR, shear, consolidation and rock strength

See all our geotechnical services and laboratory tests.

Laboratory testing: soils, rocks and chemistry

Samples from our boreholes and trial pits are tested to recognised standards (BS 1377 for soils and ISRM suggested methods for rock). We select the tests that matter for your ground and structure.

Soil classification

Moisture contentNatural water content of each layer
Atterberg limitsLiquid limit, plastic limit and plasticity index
Particle size distributionSieve and hydrometer grading
Linear shrinkage & free swellShrink-swell potential of clays
Bulk & dry densityIn-place and laboratory density
Specific gravityDensity of soil particles

Soil strength and shear

Triaxial test (UU, CU, CD)Shear strength under confining pressure, short and long term
Direct shear (shear box)Cohesion and angle of friction
Unconfined compressionQuick strength of cohesive soils
Laboratory vaneUndrained strength of soft clays
Consolidation (oedometer)Settlement and swelling pressure under load
Swelling pressure testUplift force of expansive clays

Compaction, permeability and collapse

Proctor compactionOptimum moisture content and maximum dry density
California Bearing Ratio (CBR)Strength of subgrades, fills and road materials
Permeability (falling & constant head)How fast water moves through soil
Collapse potentialSettlement of loose soils when wetted

Rock strength and durability

Uniaxial compressive strength (UCS)Strength of rock cores
Point load indexFast rock strength on site or in the lab
Brazilian tensile strengthTensile strength of rock
Triaxial rock strengthRock strength under confinement
Slake durabilityHow weak rocks break down when wetted and dried
Density, porosity & absorptionBasic physical properties of rock
Core logging, TCR, SCR & RQDRock quality from recovered cores

Chemical tests

pHAcidity or alkalinity of soil and water
Sulphate (soil & groundwater)Attack on concrete foundations
ChlorideCorrosion of reinforcing steel
Organic matter contentWeak, compressible organic soils
Carbonate contentCoral and calcareous soils
Total dissolved solids & conductivitySalinity of soil and groundwater
Gypsum contentSoluble, aggressive ground

Piezometer installation for groundwater monitoring

Where groundwater affects a project, such as basements, deep excavations, slopes, coastal sites, soft clays and black cotton areas, we install piezometers to monitor groundwater levels and pore water pressures over time.

Standpipe (Casagrande) piezometersSimple, robust water level monitoring in boreholes
Vibrating wire piezometersAccurate pore pressure readings, suited to data loggers
Proper installationSand filter at the response zone, bentonite seal above, and a lockable protective cover
MonitoringRegular readings with a dip meter or automatic logger, reported with rainfall and tides

Piezometers are installed in our investigation boreholes where needed, so groundwater can be monitored before, during and after construction.

What the geotechnical report contains

What affects the cost of a geotechnical survey?

The cost depends on the size and type of structure, the site area, the number and depth of boreholes and tests and the ground conditions. A single house on firm ground needs far less work than a multi-storey building, a bridge or an industrial yard on black cotton soil. Contact us with your project details for a quotation.

Geotechnical surveys in every county of Kenya

Choose your county to see its engineering geology, the ground hazards to watch for and the investigations we recommend.

Frequently asked questions

How much does a geotechnical survey cost in Kenya?

It depends on the size and type of structure, the site area, the number and depth of boreholes and tests, and the ground conditions. Contact Quantum Geoconsultants with your project details for a quotation.

Is soil testing mandatory in Kenya?

Under the National Building Code 2024, enforced from March 2025, geotechnical assessment is treated as a precondition for construction and is used to set design values such as allowable bearing pressure.

What is black cotton soil and why is it a problem?

Black cotton soil is an expansive clay that swells when wet and shrinks when dry. It cracks walls, floors and roads unless foundations are taken below it, the soil is replaced, or suitable foundations such as piles are used.

How long does a geotechnical survey take?

Fieldwork for a typical building takes from one day to a few days, followed by laboratory testing and the report. Larger or more complex sites take longer.

What is the difference between a geotechnical survey and a soil test?

A soil test is part of a geotechnical survey. The full survey combines drilling, in-situ tests, laboratory tests and engineering analysis to recommend safe foundations.

Which laboratory tests do you carry out for Kenya projects?

We test soils for classification, strength and shear (triaxial, shear box, unconfined compression), compaction, CBR, consolidation and permeability; rocks for UCS, point load, tensile strength and durability; and soil and groundwater chemistry, including pH, sulphate, chloride and organic content.

Do you install piezometers in Kenya?

Yes. Where groundwater matters, we install standpipe or vibrating wire piezometers in our investigation boreholes to monitor groundwater levels and pore water pressures over time.

References and further reading

  1. National Building Code 2024 (National Construction Authority)
  2. Mandatory soil test looms for developers before construction (The Standard)
  3. Subsoil conditions and structural defects in Nairobi (South Eastern Kenya University repository)
  4. Experimental study of black cotton soil stabilization with natural lime and pozzolans in pavement subgrade construction (Coatings, MDPI, 2022)
  5. Foundation soils and ground fissures along the Nairobi to Malaba railway (Frontiers in Earth Science, 2022)
  6. Geologists raise concerns about effects of Great Rift Valley split (The Standard)
  7. ThinkHazard: earthquake hazard, Rift Valley, Kenya (GFDRR)
  8. Seismic zoning and the Kenyan seismic code (Journal of the South African Institution of Civil Engineering)
  9. Elevation and slope as key determinants of landslide-prone areas in Murang'a County, Kenya (EANSO, 2024)
  10. Status report with respect to landslides, May 2020 (CCRP)
  11. Karstified limestones and caves between Mombasa and Kilifi (Goldschmidt Conference abstract, 2025)
  12. Coastal geology and stratigraphy of the Mombasa area (KMFRI, VLIZ repository)
  13. From managing disaster to prevention: flooding and black cotton soils in Kisumu (UNDRR)
  14. Barasa M. et al. (2018). Africa Groundwater Atlas: Hydrogeology of Kenya. British Geological Survey

🏗️ Request a geotechnical survey quote

The scope and cost of a geotechnical investigation depend on the size and type of structure, the site area and the ground conditions. Tell us about your project and we will propose an investigation programme and quotation.

Under the National Building Code 2024, soil testing is now expected before construction. We reply with a proposed programme and quotation.

Book a geotechnical survey in Kenya

Know your ground before you build. Send us your site location and project details and we will propose an investigation programme and quotation.

💬 WhatsApp