A fault detection survey in Nakuru and the wider Rift Valley locates faults, buried fissures and erodible ash zones before you build, lay a pipeline or construct a road. The 2018 fissures near Mai Mahiu showed how quickly hidden weaknesses can open after heavy rain.
Faults and ground fissures in the Rift Valley
The Rift floor around Nakuru, Naivasha, Mai Mahiu and Suswa is cut by faults and blanketed by young volcanic ash and pumice. In March 2018, fissures opened near Mai Mahiu and close to the Nairobi to Malaba railway after heavy rain. Research links such fissures to groundwater eroding volcanic soils, and geologists have pointed to erosion of ash along faults and lava tubes, recommending geotechnical mapping of high-risk areas. Young volcanic soils around Suswa are also highly vulnerable to gullying. The Rift Valley carries a medium earthquake hazard.
How we investigate faults and fissures
- Mapping of fault scarps, cracks, gullies and lineaments from the ground and imagery.
- ERT lines across suspected zones, where faults and eroded fissures show as resistivity contrasts.
- Seismic refraction and MASW to find low-velocity, loosened ground.
- Trial pits and boreholes to confirm and log features.
- Report with a hazard map, set-backs and foundation and drainage advice.
Designing around faults and fissures
- Keep buildings off mapped faults and fissures, with set-backs
- Use stiff, reinforced rafts that tolerate ground movement
- Design drainage so water does not soak into ash soils
- Apply earthquake design as the building code requires
Areas we cover
Nakuru, Naivasha, Gilgil, Mai Mahiu, Suswa, Narok, Baringo and the wider Rift Valley. See our geotechnical surveys in Nakuru, Narok and Baringo.
Fault detection survey cost
The cost depends mainly on the site area or route length, the methods required and access.
Ask us for a quote. Send your site location and project details for a quotation.
Frequently asked questions
Why do fissures open in Nakuru and the Rift Valley?
The Rift floor is cut by faults and covered by loose volcanic ash and pumice. Studies link fissures, such as those that opened near Mai Mahiu in 2018, to water eroding these soils along faults and lava tubes, especially after heavy rain.
How do you detect faults and fissures?
We combine geological and satellite mapping with electrical resistivity tomography, seismic refraction and MASW across the site, then confirm anomalies with trial pits or boreholes.
Can I build near a fault?
Structures should avoid being built across mapped faults and fissures. Where a site is near one, set-backs, stiff reinforced rafts, drainage that keeps water out of ash soils and earthquake design all reduce the risk.
How much does a fault detection survey cost?
It depends on the site area or route length, the methods required and access. Contact us for a quotation.
References and further reading
- Foundation soils and ground fissures along the Nairobi to Malaba railway (Frontiers in Earth Science, 2022)
- Geologists raise concerns about effects of Great Rift Valley split (The Standard)
- Suswa havoc: human activity has caused damage that is costly to fix (Daily Nation)
- ThinkHazard: earthquake hazard, Rift Valley, Kenya (GFDRR)
- Seismic zoning and the Kenyan seismic code (Journal of the South African Institution of Civil Engineering)
- Zohdy A. A. R., Eaton G. P. and Mabey D. R. Application of surface geophysics to ground-water investigations (USGS Techniques of Water-Resources Investigations, Book 2, Chapter D1)
📡 Request a geophysical survey quote
The cost of a geophysical survey depends mainly on the area or length of survey lines, the methods and depth of investigation needed, and site access. Tell us about your project and we will propose a survey design and quotation.
We reply with a proposed survey design and quotation. Prices are not listed online because every site and target is different.
Plan your geophysical survey
Tell us your site, target and depth of interest. We will recommend the right methods and send a survey design and quotation.