Get a Quote

ERT Survey in Kenya (Electrical Resistivity Tomography)

Electrical resistivity tomography (ERT) surveys in Kenya: 2D sections of soil, rock, groundwater, cavities and faults for construction. Get a quote.

By Quantum Geoconsultants hydrogeology teamUpdated 15 November 20261 min read
TopsoilWeathered rock (regolith)Water at base of weathered zoneFractured granite / gneiss Resistivity survey 2D resistivity section

ERT passes current through many electrodes and builds a 2D image of resistivity. Clay, water, dry rock and air-filled voids each show up differently.

An ERT survey in Kenya (electrical resistivity tomography) produces a continuous 2D image of the ground along a survey line. It is one of the most versatile tools in a subsurface investigation, mapping soil and rock layers, groundwater, cavities, faults and weak zones.

How electrical resistivity tomography works

Dozens of electrodes are placed along a line and connected to a resistivity meter. Current is passed between pairs of electrodes while voltages are measured at others, in many combinations. An inversion program converts the readings into a section of true resistivity. The USGS describes direct-current resistivity, by sounding and profiling, as a standard method for subsurface investigations.

What ERT finds

ERT in Kenyan ground

What you receive

ERT survey cost in Kenya

The cost depends mainly on the number and length of survey lines, the depth required and site access.

Ask us for a quote. Send your site location and project details for a quotation.

Frequently asked questions

What is electrical resistivity tomography?

ERT is a geophysical method that injects electric current into the ground through many electrodes along a line and measures the resulting voltages. Computer inversion turns these readings into a 2D section of resistivity, revealing soil and rock layers, groundwater, cavities and faults.

How is ERT different from VES?

Vertical Electrical Sounding (VES) gives layering at a single point. ERT measures many points along a line and produces a continuous 2D image, which is better for complex or changing ground.

Can ERT find cavities?

Yes. Air-filled voids usually appear as very high resistivity and water- or clay-filled voids as low resistivity, so ERT is widely used to screen for cavities before drilling to confirm them.

How much does an ERT survey cost in Kenya?

It depends on the number and length of survey lines, the depth required and access. Contact us for a quotation.

References and further reading

  1. Zohdy A. A. R., Eaton G. P. and Mabey D. R. Application of surface geophysics to ground-water investigations (USGS Techniques of Water-Resources Investigations, Book 2, Chapter D1)
  2. USGS Geophysical Research and Development: gravity, magnetic, electrical, electromagnetic and seismic methods
  3. Barasa M. et al. (2018). Africa Groundwater Atlas: Hydrogeology of Kenya. British Geological Survey

📡 Request a geophysical survey quote

The cost of a geophysical survey depends mainly on the area or length of survey lines, the methods and depth of investigation needed, and site access. Tell us about your project and we will propose a survey design and quotation.

We reply with a proposed survey design and quotation. Prices are not listed online because every site and target is different.

Plan your geophysical survey

Tell us your site, target and depth of interest. We will recommend the right methods and send a survey design and quotation.

💬 WhatsApp