Get a Quote

Borehole Camera Inspection in Kenya

Borehole camera inspection in Kenya: downhole CCTV video of casing, screens and fractures, with a written report to diagnose lost yield, sand or a stuck pump.

By Quantum Geoconsultants hydrogeology teamUpdated 16 November 20264 min read
REC · LIVE VIEW Casing jointCrack in casingScreen: slots cloggedSilt at the bottom Monitor & recorder Video, log & written report

The camera goes down on a measured cable while the monitor records the casing joints, a crack, the clogged screen and silt at the bottom, each logged by depth.

Borehole camera inspection in Kenya lets you see inside your borehole instead of guessing. We lower a waterproof downhole video camera on a depth-measured cable and record the casing, joints, screens, fractures and the bottom of the borehole, then give you a written inspection report with the video, still images and a depth-referenced log. It is the fastest way to find out why a borehole has failed, check that a new one was built as claimed, or locate a lost pump.

What a borehole camera inspection shows

The camera looks straight down the borehole and, with a side-view head, at the casing wall. The US Environmental Protection Agency describes borehole video as a way to check casing and screen condition, including cracks, holes, rust, enlarged screen openings and foreign objects. In practice we record:

Casing and jointsCracks, holes, corrosion, separated or leaking joints.
ScreensClogging by silt, scale or iron slime, and damaged or enlarged slots letting in sand.
Water level and inflowThe static water level and where water enters, through screens or fractures.
Open hole and fracturesFractured zones, cavities and collapse in unlined sections of rock.
Depth and siltThe true depth today and how much silt or collapsed material has filled the bottom.
Lost pumps and objectsThe position and condition of a dropped pump, pipe, cable or tool, to plan its recovery.

When you need a camera inspection

Check that your borehole was built as claimed

A borehole completion record lists the total depth, the casing type and depth, and where the screens were placed. Once a borehole is finished, most owners never see any of this. A camera inspection compares the borehole as built with the completion record: the total depth, the length and type of casing, the screen positions and the quality of the joints. It is an independent check that protects your investment, and it is useful evidence if the borehole fails early.

How we carry out the inspection

  1. Plan: borehole depth, diameter, records and what you need to find out.
  2. Prepare: pull the pump and riser, and let the water settle or flush it if it is muddy.
  3. Measure the static water level and the depth to the bottom.
  4. Inspect: lower the camera slowly on its depth-measured cable, recording continuously, with side views of key features.
  5. Review on site with you, so you see the main findings straight away.
  6. Report: video, still images, a depth-referenced log and our findings and recommendations.
  7. Follow-up: flushing, pump recovery, repairs or a new borehole, if needed.

What the inspection report contains

Borehole camera inspection report
  • Borehole details: location, depth, diameter and the date of inspection
  • Full video recording, with depth shown throughout
  • Still images of every important feature, labelled with its depth
  • A depth-referenced log of casing, joints, screens, water level, inflow zones, damage and silt
  • A comparison with the completion record, where one is available
  • An overall condition assessment of the casing, screens and open hole
  • Clear recommendations: no action, flushing, pump recovery, repair, deepening or a new borehole

What we find in Kenya's boreholes

AquiferWhereCommon findings
Volcanic rocksNairobi, Kiambu, NakuruLong open-hole sections in lava, fractured water-bearing zones, collapse, and deep water levels
Basement rocksMachakos, Kitui, KakamegaWater-bearing fractures, weathered rock collapsing below the casing, silt-filled bottoms
Sedimentary basinsGarissa, WajirScale and corrosion on screens and casing from mineralised water, sand entry
Coastal coral and sandsMombasa, KilifiCorroded steel casing, cavities in the coral, sand entry
Iron-rich groundwaterBusia, Siaya, KisumuOrange iron deposits and bacterial slime coating the screens

Limits of a camera inspection

A camera needs clear water. Muddy or sandy water must settle or be flushed out first. The pump and riser usually have to come out. A camera shows what is visible: it cannot measure the rock's permeability or the borehole's yield, which needs a pumping test, and it cannot see behind the casing. Agencies such as the US EPA describe borehole video as a fast first look, often combined with other tests. We tell you clearly what the video does and does not show.

Cost of a borehole camera inspection and mobilisation

The cost depends on the borehole depth, whether we need to pull and reinstall the pump, whether flushing is needed first, the level of reporting and site access.

Mobilisation from Nairobi

We are based in Nairobi, so mobilisation costs change with the distance to your site. Mobilisation covers moving the camera, crew and equipment to your borehole, plus accommodation where needed. It is lowest near Nairobi and rises for distant counties, and is shown as a separate item in the quotation. Combining the inspection with flushing or pump work means one mobilisation instead of several.

Borehole camera inspection in every county of Kenya

Choose your county to see what our camera commonly finds in its boreholes, what the report contains and the towns we serve.

Frequently asked questions

How much does a borehole camera inspection cost in Kenya?

It depends on the borehole depth, whether the pump must be pulled, whether flushing is needed first and the level of reporting. Because we are based in Nairobi, mobilisation is quoted separately and rises with distance.

What is a borehole camera inspection?

A waterproof video camera is lowered down the borehole on a depth-measured cable to record the casing, screens, fractures, water level and bottom. The findings are given in a written report with the video.

Can a camera inspection find a lost pump?

Yes. The camera shows where the pump, pipe or cable is and how it is lying, so the recovery can be planned safely.

Can a camera check whether my borehole was drilled as claimed?

Yes. It shows the total depth, the casing and the screen positions, which can be compared with the completion record.

Does the pump have to be removed?

Usually yes, as the pump and riser block the camera. We can pull and reinstall it as part of the job.

What if the water is muddy?

The camera needs clear water, so a muddy borehole is left to settle or flushed first.

References and further reading

  1. US EPA: borehole video camera (environmental geophysics)
  2. USGS: geophysical and video logging, Idaho National Laboratory
  3. A closer look at southeast regional drinking water wells: identifying problems using a down-well camera (Georgia Tech repository)
  4. SSWM: well development and rehabilitation
  5. Barasa M. et al. (2018). Africa Groundwater Atlas: Hydrogeology of Kenya. British Geological Survey

📹 Is your borehole ready for a camera?

A camera inspection needs clear water and a clear path down the borehole. Answer a few questions to see what preparation is needed and what the inspection will focus on.

0readiness (%)
0preparation steps
0camera cable needed (m)

Book a borehole camera inspection

Send us the borehole depth, diameter and what you want to find out. We will plan the inspection and send a quotation for the survey and written report, including mobilisation from our Nairobi base.

💬 WhatsApp