Storage is the link between the borehole and the user. A well-sized water storage tank lets the pump run efficiently, meets peak demand and provides reserve water. This article explains how to size it and integrate it with the pumping system.
Why storage matters
- Pumps run steadily at their efficient duty point rather than starting and stopping constantly.
- Peak demands (mornings, evenings, milking times) can exceed pump output.
- Solar pumps only run in daylight.
- Reserve water covers breakdowns and power cuts.
- Low-yield boreholes can be pumped slowly over long periods.
Step 1: Daily demand
Calculate total daily use. See pumping capacity.
Step 2: Days of storage
- Grid-powered systems with reliable supply: often half a day to one day.
- Solar systems: typically one to three days to cover cloudy weather.
- Critical uses such as hospitals: more reserve.
Step 3: Calculate volume
Tank volume = daily demand × days of storage
Example: a school uses 8 m³/day with a solar pump and wants two days of storage: 16 m³, so a 16,000 to 20,000 litre tank or combination of tanks.
Step 4: Consider peak flows
Check the tank can supply peak demand while the pump refills it, especially in the evening when solar pumping has stopped.
Step 5: Choose tank type and location
- Plastic, steel, concrete or masonry tanks. See types of water storage tanks.
- Elevated tanks provide gravity pressure; ground tanks may need a booster pump.
- Locate tanks on firm ground with good access.
Heavy elevated tanks need proper foundations. See foundations for water towers.
Integration with controls
- Float switches or level sensors start and stop the pump automatically.
- The switching band should avoid frequent short cycles.
- Overflow pipes should discharge safely away from foundations.
- Level indicators help users monitor supply.
See control panels and protection.
Water quality in storage
Tanks should be covered, sealed against insects and dust, cleaned regularly and placed to avoid excessive heating. See water quality in storage tanks.
How Quantum Geoconsultants can help
We design pumping, storage and water towers as one system. See water tower construction and pump installation.
Frequently asked questions
How big should my borehole tank be?
Often at least one day of demand, and more for solar systems or where supply interruptions are common.
Why not pump directly to taps?
A tank lets the pump run steadily at its best rate, smooths peaks in demand, provides reserve water and reduces starts and stops.
Should the tank be elevated?
Elevating the tank provides gravity pressure to taps. The height needed depends on the pressure required at the furthest or highest outlet.
⚙️ Borehole pump size calculator
Enter your borehole's numbers from the test pumping report (or your best estimate) to see the total head, the flow and roughly how big a submersible pump or solar array you need.
Rough planning figures only. Total head = pumping water level + tank height + an allowance for pipe friction. The final pump is chosen from the manufacturer's pump curves, your test pumping yield and your water quality.
Send these numbers on WhatsAppGet a borehole pump installation quote
Send us your test pumping report, borehole depth and where the tank will sit. We will size the right submersible or solar pump and send a quotation for supply, installation and commissioning.