Choosing the right tank affects cost, durability, water quality and the tower design. This article compares the main types of water storage tanks used in Kenya and East Africa.
Plastic (polyethylene) tanks
- Capacities: commonly from a few hundred litres to around 10,000 litres or more per tank.
- Advantages: affordable, lightweight, corrosion-free, quick to install.
- Limitations: limited single-tank size; needs full, flat support; UV degradation if low quality.
- Best for: homes, small institutions, farms.
Pressed steel sectional tanks
- Capacities: from a few to hundreds of cubic metres.
- Advantages: strong, modular, transportable, expandable.
- Limitations: needs good corrosion protection internally and externally.
- Best for: institutions, estates, community supplies.
Galvanised corrugated steel tanks
Common for rural water and rainwater storage, usually at ground level. Need liners or coatings in aggressive water.
Fibreglass (GRP) tanks
- Advantages: corrosion-resistant, lightweight panels, good thermal properties.
- Limitations: higher cost than plastic; panels need careful handling.
- Best for: medium to large elevated tanks where corrosion is a concern, including coastal areas.
Reinforced concrete tanks
- Advantages: very durable, large capacities, keeps water cool.
- Limitations: heavy, needing substantial towers and foundations; slow to build; must be designed and built to be watertight.
- Best for: large community and municipal storage, ground and elevated reservoirs.
Masonry tanks
Stone or block tanks at ground level, rendered and waterproofed, used for rural storage and rainwater harvesting.
Comparison
| Type | Cost | Weight | Durability | Typical size |
|---|---|---|---|---|
| Plastic | Low | Light | Moderate to good | Small to medium |
| Pressed steel | Medium | Medium | Good with coatings | Medium to large |
| GRP | Medium to high | Light | Good | Medium to large |
| Concrete | High | Heavy | Very good | Large |
Choosing the right tank
- Required capacity. See tank capacity calculations.
- Elevated or ground level
- Water quality and corrosion risk
- Budget and expected life
- Access for delivery and installation
Water quality
All drinking water tanks must use materials suitable for potable water, be covered and vented, and be cleaned regularly. See water quality in storage tanks.
How Quantum Geoconsultants can help
We recommend and install tanks to suit each site, with towers designed for the chosen tank. See water tower construction.
Frequently asked questions
Which water tank lasts longest?
Well-built reinforced concrete and good-quality pressed steel or GRP tanks can last decades with maintenance. UV-stabilised plastic tanks also last many years if protected.
Are plastic tanks safe for drinking water?
Yes, if made from food-grade, UV-stabilised material and kept clean and covered.
What is a sectional tank?
A tank assembled from bolted panels, such as pressed steel or GRP, allowing large capacities and transport to difficult sites.
🏗️ Tank and water tower calculator
Work out the tank size you need, the water pressure your tower will give at the taps, and how heavy the full tank will be. That load is what the tower foundation must carry.
Each metre of height gives about 0.1 bar of pressure. Rough planning figures only: the tower and foundation must be designed by an engineer for the tank load, wind and your ground conditions.
Send these numbers on WhatsAppGet a water tower quote
Send us your site location, tank size and the height you need. We will design the tower and foundation and send a quotation, including mobilisation from our Nairobi base.