The electrical resistivity survey is one of the most versatile tools in near-surface geophysics. It is used to find groundwater, map rock and soil layers, detect cavities and faults, trace contamination and even design electrical earthing systems. This article explains the principles, the main methods and where they are applied.
The principle
Resistivity is a material’s resistance to electric current. In the ground, current flows mainly through water in pores and fractures, and through clay minerals. So resistivity depends on:
- Porosity and water content: wetter ground conducts better.
- Water salinity: salty water is highly conductive.
- Clay content: clays are conductive.
- Rock type and fracturing: fresh crystalline rock is highly resistive.
By measuring resistivity, we can infer what lies beneath the surface.
Making a measurement
Two current electrodes inject a known current into the ground and two potential electrodes measure the voltage. From current, voltage and the electrode geometry, the apparent resistivity is calculated. Larger electrode spacings sample deeper ground.
Electrode arrays
- Wenner: four equally spaced electrodes. Strong signal, good for horizontal layers, less sensitive to vertical features.
- Schlumberger: potential electrodes close together at the centre. Efficient for vertical soundings.
- Dipole-dipole: current and potential pairs separated. Sensitive to vertical structures such as fractures and dykes, but weaker signal.
- Pole-dipole and gradient arrays: deeper penetration or faster data collection for larger surveys.
Survey methods
Vertical Electrical Sounding (VES)
Expanding the electrodes about a fixed point to determine how resistivity changes with depth. Ideal for layered ground. See VES for groundwater exploration.
Profiling
Moving a fixed array along a line to map lateral changes at roughly constant depth. Fast for locating fracture zones and boundaries.
Electrical Resistivity Tomography (ERT)
Many electrodes along a line, switched automatically, combine sounding and profiling. Inversion produces a 2D, or with grids, 3D image of the subsurface. See 2D ERT for subsurface investigation.
Applications
Groundwater
Siting boreholes, mapping aquifer thickness, finding fractures and avoiding saline zones. See resistivity for groundwater exploration.
Engineering and construction
Depth to bedrock, cavities in limestone, buried channels, faults, landslide investigation and dam seepage paths.
Environmental
Mapping landfill extent, leachate plumes and saline intrusion.
Electrical earthing
Soil resistivity measured with the Wenner method is used to design earthing for substations, solar farms and telecom towers.
Mineral exploration
Resistivity, often with induced polarisation, maps alteration zones and sulphide-bearing bodies.
Strengths and limitations
- Strengths: portable, relatively low-cost, sensitive to water and clay, works in many settings.
- Limitations: resolution decreases with depth; clay and saline water can look similar; power lines and metal pipes cause noise; interpretation needs geological control.
See limitations of geophysical surveys.
Good practice
- Choose the array and spread to suit the target depth and geometry.
- Check electrode contact and repeat noisy readings.
- Record topography and include it in inversion.
- Calibrate interpretation with boreholes or known geology.
How Quantum Geoconsultants can help
We carry out VES, ERT and earthing resistivity surveys across Kenya and Somalia. See our ERT surveys, geophysical surveys in Kenya and Somalia.
Frequently asked questions
What does an electrical resistivity survey measure?
It measures how strongly the ground resists the flow of electric current, which varies with rock type, water content, salinity and clay content.
Which electrode array is best?
It depends on the target. Wenner is robust and good for layers, Schlumberger is efficient for soundings, and dipole-dipole is sensitive to vertical features.
What are resistivity surveys used for?
Groundwater exploration, depth to bedrock, cavity and fault detection, landfill and contamination mapping, earthing design and mineral exploration.
📡 Request a geophysical survey quote
The cost of a geophysical survey depends mainly on the area or length of survey lines, the methods and depth of investigation needed, and site access. Tell us about your project and we will propose a survey design and quotation.
We reply with a proposed survey design and quotation. Prices are not listed online because every site and target is different.
Plan your geophysical survey
Tell us your site, target and depth of interest. We will recommend the right methods and send a survey design and quotation.