Get a Quote
← All articles

BS EN ISO 22282: Geohydraulic Testing in Ground Investigations

An overview of BS EN ISO 22282 geohydraulic testing: open and closed system borehole tests, Lugeon packer tests, pumping tests and infiltration tests, and when each is used.

By Quantum Geoconsultants hydrogeology teamUpdated 19 November 20262 min read
TopsoilLava flowFractured lava flowWater between lava flowsOlder lavas & tuffs Depth set by the survey

💧 Hydrogeology & Boreholes: a technical article by the Quantum Geoconsultants hydrogeology team.

BS EN ISO 22282 sets out how to carry out geohydraulic testing, field tests that measure the permeability of soil and rock. These tests are essential for dewatering, dam foundations, tunnels, landfills and groundwater studies. This article summarises the standard and when each test is used.

The parts of the standard

Part 1: general rules

Sets out principles common to all tests: planning, equipment calibration, measuring water levels and flows, recording and reporting. It emphasises understanding the ground conditions, as test results depend on the volume of ground tested.

Part 2: open system borehole tests

Commonly called falling head and rising head tests. Water is added to or removed from a borehole or standpipe, and the change in level over time is measured. The rate of return to equilibrium gives the permeability of the soil around the test section.

Part 3: water pressure tests in rock (Lugeon tests)

A section of borehole in rock is isolated with inflatable packers and water is injected at several pressure stages. The flow rate at each stage is recorded. Results are expressed in Lugeon units, where one Lugeon equals a flow of 1 litre per minute per metre of test section at a pressure of 10 bar.

Part 4: pumping tests

Covers pumping from a well while measuring drawdown in it and in observation wells. Pumping tests measure the properties of a large volume of aquifer and are the most reliable method for water supply and large dewatering schemes. See pumping tests in groundwater investigations.

Part 5: infiltrometer tests

Measures infiltration rates at the ground surface using single or double ring infiltrometers. Used for soakaways, stormwater infiltration, irrigation and recharge studies.

Part 6: closed system tests

Tests where the test section is sealed and pressure changes are measured, suitable for low-permeability soils and rocks where open tests would be too slow.

Choosing the right test

Need Suitable test
Permeability of soil for excavation design Falling or rising head (Part 2)
Rock mass permeability for a dam Lugeon packer test (Part 3)
Aquifer properties for water supply or dewatering Pumping test (Part 4)
Infiltration for soakaways Infiltrometer (Part 5)
Very low permeability ground Closed system test (Part 6)

Practical tips

How Quantum Geoconsultants can help

We carry out permeability, packer and pumping tests as part of geotechnical and hydrogeological investigations. See groundwater monitoring, aquifer properties and our geotechnical surveys.

Frequently asked questions

What is geohydraulic testing?

It is field testing to measure how easily water flows through soil and rock, used for dewatering, seepage, dam and groundwater design.

What is a Lugeon test?

A water pressure (packer) test in rock where water is injected into a sealed section of borehole. One Lugeon is a flow of 1 litre per minute per metre at 10 bar.

Which part covers pumping tests?

Part 4 of BS EN ISO 22282 covers pumping tests.

💧 Water demand calculator

How much water does your borehole need to deliver each day? Enter your numbers for a quick planning estimate.

0litres per day
0suggested tank (litres)
0pump flow (m³/hour, solar)

Rough planning figures only, using typical daily use per person and per animal, with one day of storage and about 6 hours of good sun. Your test pumping result sets the final pump size.

Get a borehole quote for Kenya

Send us your location. We will advise on the survey, permits, expected depth and the full cost up to a working solar borehole.

💬 WhatsApp