Every borehole draws water from an aquifer. Understanding what aquifers are and how they behave helps explain why one borehole yields thousands of litres an hour while another nearby is almost dry. This article introduces the main aquifer characteristics and how groundwater aquifers occur in East Africa.
What is an aquifer?
An aquifer is a body of rock or sediment that can both store and transmit groundwater in useful quantities. Materials that store water but transmit it very slowly, such as clay, are called aquitards or aquicludes.
Key properties
- Porosity: the proportion of voids in the material. Clay can have high porosity but its tiny pores hold water tightly.
- Effective porosity or specific yield: the part of the water that drains under gravity and is available to wells.
- Permeability or hydraulic conductivity (K): how easily water flows through the material.
- Transmissivity (T): K multiplied by aquifer thickness, describing how much water the whole aquifer can transmit.
- Storativity (S): how much water the aquifer releases per unit decline in head.
These properties are measured by pumping tests; see transmissivity, conductivity and storativity.
Types of aquifers
Unconfined aquifers
The upper surface is the water table, which rises and falls with recharge and pumping. Common in alluvial valleys, coastal sands and weathered zones. They are recharged easily but are also more vulnerable to pollution.
Confined aquifers
These lie beneath a low-permeability layer and are under pressure. When drilled, water rises above the top of the aquifer, sometimes to the surface (artesian flow). They are better protected but may be recharged far away and slowly.
Perched aquifers
Small bodies of water held above a local clay or rock layer, above the main water table. They can give early water strikes that dry up in the dry season.
Leaky aquifers
Semi-confined aquifers receive some water through the overlying aquitard, which affects how they respond to pumping.
Types by rock
- Porous (intergranular) aquifers: sands, gravels and sandstones where water moves between grains.
- Fractured aquifers: crystalline basement and volcanic rocks where water moves through fractures and joints.
- Karst aquifers: limestones with dissolved channels, which can be very productive but variable.
Groundwater occurrence in East Africa
- Basement rocks (gneisses and schists in eastern and southern Kenya, parts of Somalia): water occurs in the weathered zone and fractures beneath it. Yields are often modest and site selection is critical.
- Volcanic rocks (Nairobi, central highlands, Rift Valley): water occurs in fractured lavas, weathered horizons and between flows. Yields can be good, but fluoride is a concern in parts of the Rift.
- Sedimentary basins (northeastern Kenya, coastal belt, much of Somalia): sand and sandstone aquifers, sometimes deep, often with salinity risk.
- Coastal limestones and sands (Mombasa, Malindi, Mogadishu): productive but vulnerable to saline intrusion. See groundwater salinity in coastal areas.
- Alluvial aquifers along rivers and sand rivers (laggas): shallow and recharged by floods.
Recharge and flow
Aquifers are recharged mainly by rainfall infiltrating the ground and by leakage from rivers. Groundwater moves slowly from recharge areas to discharge areas such as springs, rivers and the sea. Understanding recharge is essential for sustainable groundwater development.
Why aquifer type matters for boreholes
Aquifer type affects drilling method, depth, casing and screen design, expected yield and how the borehole should be pumped. A borehole in fractured basement needs a different approach from one in thick alluvial sand.
How Quantum Geoconsultants can help
Our hydrogeologists identify and assess aquifers through surveys, drilling and test pumping. See hydrogeological surveys, borehole drilling and our groundwater exploration guide.
Frequently asked questions
What is an aquifer?
An aquifer is a layer of rock or sediment that can store and transmit enough groundwater to supply a borehole or spring.
What is the difference between confined and unconfined aquifers?
An unconfined aquifer has the water table as its upper surface. A confined aquifer lies beneath a low-permeability layer and is under pressure, so water rises in a borehole above the top of the aquifer.
Which rocks make the best aquifers?
Clean sands and gravels, fractured volcanic rocks and karstic limestones are often productive, while clays and unfractured crystalline rocks are poor aquifers.
💧 Water demand calculator
How much water does your borehole need to deliver each day? Enter your numbers for a quick planning estimate.
Rough planning figures only, using typical daily use per person and per animal, with one day of storage and about 6 hours of good sun. Your test pumping result sets the final pump size.
Send these numbers on WhatsAppGet a borehole quote for Kenya
Send us your location. We will advise on the survey, permits, expected depth and the full cost up to a working solar borehole.