BS 5930 is best known as the code of practice for geotechnical ground investigations. Yet its core principles apply just as strongly to hydrogeological surveys and water borehole projects. Applying them leads to better siting, better borehole design and better records for the future.
Principle 1: Start with a desk study
BS 5930 places the desk study at the heart of every investigation. For groundwater, this means gathering:
- Geological and hydrogeological maps
- Records of nearby boreholes: depth, lithology, yield, water level and quality
- Rainfall, topography and drainage
- Satellite imagery and known faults or lineaments
- Known problems such as fluoride, salinity or dry boreholes in the area
A careful desk study often explains more about likely success than fieldwork alone.
Principle 2: Build and refine a ground model
BS 5930 encourages engineers to develop a conceptual ground model and update it as information arrives. In hydrogeology, this becomes a conceptual model of the aquifer: where water is stored, how it is recharged and where it flows. Geophysics, drilling and test pumping each refine that model. See hydrogeological surveys: a complete guide.
Principle 3: Phase the investigation
Large water supply projects benefit from phasing, just like large civil works:
- Desk study and reconnaissance
- Regional geophysical survey to identify targets
- Exploratory or test boreholes
- Production boreholes designed using the test results
This avoids committing to expensive production boreholes before the aquifer is understood.
Principle 4: Log consistently
BS 5930 sets out a standard way to describe soils and rocks. Using the same approach for drill cuttings and core in water boreholes means every borehole log can be compared. Good practice is to collect cuttings every metre or at every change, describe them by colour, grain size, mineralogy and weathering, and record drilling rate, fluid losses and water strikes.
Principle 5: Observe groundwater carefully
BS 5930 warns that groundwater readings taken during drilling can be misleading. In water borehole drilling, record:
- The depth of each water strike
- The rest water level after the strike stabilises
- Airlift yields at intervals during air drilling
- Electrical conductivity and temperature of water samples
- Loss or gain of drilling fluid
These observations guide where to place screens and help diagnose problems later.
Principle 6: Use the right tests
Just as BS 5930 links testing to design needs, groundwater work needs the right tests: pumping tests for yield and aquifer properties, water quality analysis for suitability, and sometimes geohydraulic tests in specific zones.
Principle 7: Separate facts from interpretation
BS 5930 separates factual reporting from interpretation. A good borehole completion report presents the facts (logs, construction, test data, chemistry) clearly, and separately gives the hydrogeologist’s interpretation and recommended pumping rate. This makes the data reusable and reviewable.
Principle 8: Safety and the environment
BS 5930 also emphasises safety, buried services and environmental protection. For boreholes this includes safe rig operation, protecting the aquifer from contamination with a sanitary seal, and correct disposal of drilling fluids.
Where geotechnics and hydrogeology meet
Many projects need both: a factory needs foundations and a borehole, and a dam needs geotechnical and groundwater information. A single team that applies consistent investigation principles to both saves time and cost.
How Quantum Geoconsultants can help
We bring geotechnical and hydrogeological expertise together, applying BS 5930 principles to every survey and borehole. See our hydrogeological surveys, borehole drilling and BS 5930 explained.
Frequently asked questions
Is BS 5930 a groundwater standard?
No, it is a code of practice for ground investigations, but its principles of planning, observation, logging and reporting apply directly to hydrogeological work.
Why log borehole cuttings?
Logging cuttings and drilling behaviour records which layers carry water, which supports correct screen placement and builds data for future boreholes.
What groundwater observations should be recorded during drilling?
Water strikes, rest levels, changes in drilling fluid loss or gain, airlift yields and any changes in water quality such as conductivity.
💧 Water demand calculator
How much water does your borehole need to deliver each day? Enter your numbers for a quick planning estimate.
Rough planning figures only, using typical daily use per person and per animal, with one day of storage and about 6 hours of good sun. Your test pumping result sets the final pump size.
Send these numbers on WhatsAppGet a borehole quote for Kenya
Send us your location. We will advise on the survey, permits, expected depth and the full cost up to a working solar borehole.