Get a Quote
← All articles

Water Storage Tank Sizing and Integration with Borehole Pumping Systems

How to size a water storage tank for a borehole system, considering daily demand, pumping hours, solar variability, peak use and emergency storage, and how to integrate it with pump controls.

By Quantum Geoconsultants pump installation teamUpdated 19 November 20262 min read
TopsoilLava flowOlder lavas & tuffsStatic water level (pump off) Pumping water level ◀ Submersible pump & motor ◀ Screen below the pump Pump sized from test pumping

⚙️ Borehole Pumps & Solar: a technical article by the Quantum Geoconsultants pump installation team.

Storage is the link between the borehole and the user. A well-sized water storage tank lets the pump run efficiently, meets peak demand and provides reserve water. This article explains how to size it and integrate it with the pumping system.

Why storage matters

Step 1: Daily demand

Calculate total daily use. See pumping capacity.

Step 2: Days of storage

Step 3: Calculate volume

Tank volume = daily demand × days of storage

Example: a school uses 8 m³/day with a solar pump and wants two days of storage: 16 m³, so a 16,000 to 20,000 litre tank or combination of tanks.

Step 4: Consider peak flows

Check the tank can supply peak demand while the pump refills it, especially in the evening when solar pumping has stopped.

Step 5: Choose tank type and location

Heavy elevated tanks need proper foundations. See foundations for water towers.

Integration with controls

See control panels and protection.

Water quality in storage

Tanks should be covered, sealed against insects and dust, cleaned regularly and placed to avoid excessive heating. See water quality in storage tanks.

How Quantum Geoconsultants can help

We design pumping, storage and water towers as one system. See water tower construction and pump installation.

Frequently asked questions

How big should my borehole tank be?

Often at least one day of demand, and more for solar systems or where supply interruptions are common.

Why not pump directly to taps?

A tank lets the pump run steadily at its best rate, smooths peaks in demand, provides reserve water and reduces starts and stops.

Should the tank be elevated?

Elevating the tank provides gravity pressure to taps. The height needed depends on the pressure required at the furthest or highest outlet.

⚙️ Borehole pump size calculator

Enter your borehole's numbers from the test pumping report (or your best estimate) to see the total head, the flow and roughly how big a submersible pump or solar array you need.

0total head (m)
0pump flow (m³/hour)
0solar array (watts)

Rough planning figures only. Total head = pumping water level + tank height + an allowance for pipe friction. The final pump is chosen from the manufacturer's pump curves, your test pumping yield and your water quality.

Get a borehole pump installation quote

Send us your test pumping report, borehole depth and where the tank will sit. We will size the right submersible or solar pump and send a quotation for supply, installation and commissioning.

💬 WhatsApp