Arid and semi-arid lands (ASALs) cover most of northern and eastern Kenya and nearly all of Somalia. Here groundwater is often the only reliable water source, yet it is unevenly distributed and boreholes are expensive. Identifying groundwater potential before drilling is essential. This article explains the methods used.
The challenge in dry lands
- Low and erratic recharge: rainfall is low and much evaporates.
- Deep water tables: boreholes may need to go well past 100 m.
- Variable geology: water may be confined to narrow fractures or old channels.
- Water quality: salinity, fluoride and hardness are common problems.
Step 1: Understand the geology and existing data
Geological maps and existing borehole records show which formations have yielded water and at what depth and quality. In ASAL counties, records of failed boreholes are just as useful as successful ones. See understanding aquifers.
Step 2: Remote sensing
Satellite data covers large, remote areas cheaply:
- Lineament mapping: straight valleys, ridges and vegetation lines may mark fractures and faults that carry water.
- Drainage analysis: drainage density and patterns indicate infiltration and recharge zones.
- Vegetation indices: green vegetation in the dry season can indicate shallow groundwater.
- Elevation models: identify depressions, alluvial fans and buried valleys.
- Radar data: can help map shallow sediments and structures beneath dry sand.
Combining these layers in GIS produces a groundwater potential map that prioritises areas for fieldwork.
Step 3: Target recharge and storage features
- Sand rivers (laggas): water stored in river sands after floods. Shallow wells, subsurface dams and sand dams can harvest it.
- Alluvial fans and buried channels: coarse sediments at the foot of hills.
- Fracture zones and dykes in basement and volcanic rocks.
- Contacts between rock types, where water may collect.
- Depressions and pans where runoff collects and infiltrates.
Step 4: Field reconnaissance
Field checks confirm lineaments, map outcrops and fractures, and record existing wells, springs and their quality. Local communities often know where water was found in the past and where it is salty.
Step 5: Geophysics
Geophysics turns targets into drilling points:
- Resistivity (VES and ERT) to find saturated zones and avoid saline layers.
- Electromagnetic surveys for fast traverses across long distances.
- Magnetic surveys to locate dykes and faults under sand cover.
Step 6: Check water quality early
In ASALs, finding water is not enough; it must be usable. Measuring the conductivity of nearby wells and boreholes, and knowing regional fluoride and salinity patterns, helps avoid drilling into unusable water. See groundwater quality assessment.
Step 7: Drill, test and learn
Exploratory boreholes with careful logging and test pumping confirm the aquifer and guide further development. Each borehole adds to the knowledge of the area.
Sustainability in dry lands
Because recharge is limited, over-pumping can lower water levels and draw in saline water. Boreholes should be pumped at tested safe yields, and water levels monitored. Solar pumping makes abstraction cheap, which makes monitoring even more important. See sustainable groundwater development.
How Quantum Geoconsultants can help
We combine remote sensing, field mapping and geophysics to site boreholes in dry lands in Kenya and Somalia. See hydrogeological surveys in Kenya, Somalia and borehole drilling in Somalia.
Frequently asked questions
Is there groundwater in arid areas?
Often yes, but it is unevenly distributed, may be deep and is sometimes saline. Careful exploration is needed to find usable water.
What are lineaments?
Straight features seen on satellite images, such as valleys or vegetation lines, that may mark fractures or faults where groundwater collects.
What are sand rivers?
Seasonal rivers whose sandy beds store water below the surface after floods, a valuable shallow water source in dry lands.
💧 Water demand calculator
How much water does your borehole need to deliver each day? Enter your numbers for a quick planning estimate.
Rough planning figures only, using typical daily use per person and per animal, with one day of storage and about 6 hours of good sun. Your test pumping result sets the final pump size.
Send these numbers on WhatsAppGet a borehole quote for Kenya
Send us your location. We will advise on the survey, permits, expected depth and the full cost up to a working solar borehole.