Every accurate survey and every correctly built structure depends on a reliable framework of survey control points and benchmarks. They are the fixed references from which everything else is measured. This article explains how they are established and maintained.
Why control matters
- Ties all surveys, designs and setting out to one consistent system.
- Limits error build-up across large sites.
- Allows different teams and contractors to work to the same reference.
- Enables monitoring of settlement and movement over time.
Types of control
- Horizontal control: points with known easting and northing coordinates.
- Vertical control (benchmarks): points with known heights.
- Most project control points provide both.
Monumentation
Control points must be stable and durable:
- Concrete pillars or blocks with a steel pin or plate
- Survey nails or bolts set in rock, concrete or kerbs
- Deep-set benchmarks for settlement monitoring
Avoid placing them where they will be disturbed by construction traffic or excavation.
Establishing control
Connecting to national control
Where available, project control is tied to national survey control or continuously operating reference stations, so coordinates fit official maps and other projects. Otherwise, a local system is established and documented.
Static GNSS
Long-session GNSS observations, processed together, give precise coordinates over large areas.
Traversing
Total station traverses between known points measure angles and distances around a loop or between control points. Closure errors are checked and adjusted. See accuracy and quality control.
Levelling
Precise levelling transfers heights from a known benchmark, with loops closed back to the start to check accuracy.
Height datums
Heights may be referenced to mean sea level through national benchmarks, to a geoid model applied to GNSS heights, or to a local project datum. Mixing datums causes serious errors, for example in drainage falls, so the datum must be stated on every drawing.
Documentation
A control schedule lists each point’s number, coordinates, height, description and a sketch or photo, with the coordinate system and datum. Contractors receive this before setting out.
Protecting and checking control
- Fence or mark points clearly.
- Re-check points periodically, especially after heavy works nearby.
- Replace destroyed points from surviving ones, and update the schedule.
Control for monitoring
Settlement monitoring of buildings, embankments and excavations needs stable reference benchmarks outside the zone of influence, often deep-set, and repeated precise levelling.
How Quantum Geoconsultants can help
We establish control networks with GNSS, total station and levelling for surveys and construction. See topographic surveys, construction site surveys and setting out works.
Frequently asked questions
What is a survey control point?
A permanently marked point with accurately known coordinates, used as the reference for surveying and setting out.
What is a benchmark?
A stable point with an accurately known height, used as the reference for levels.
How many control points does a site need?
Enough that every part of the site can be surveyed and set out from at least two intervisible points, with spares in case some are destroyed.
📐 Request a topographic survey quote
The cost of a topographic survey depends mainly on the size of the site, the level of detail needed, the ground cover and whether a drone can be used. Tell us about your site and we will recommend a method and send a quotation.
We reply with the recommended method, deliverables and a quotation. Prices are not listed online because every site is different.
Get a topographic survey quote
Send us your site location, its approximate size and what the survey is for. We will recommend ground or drone methods and send a quotation, including mobilisation from our Nairobi base.