Modern surveyors have powerful tools, but each has strengths and weaknesses. This article explains the main land surveying methods: the total station, GNSS (including GPS) and the level, and how they are combined.
The total station
A total station combines an electronic theodolite (measuring horizontal and vertical angles) with an electronic distance meter. Sighting a prism or a surface, it calculates the 3D coordinates of points relative to its known position.
- Accuracy: millimetres to a few millimetres over typical distances.
- Strengths: works under trees, near buildings and indoors; excellent for detail and setting out.
- Limitations: needs line of sight; slower over large open areas; requires known control points.
- Robotic and reflectorless models allow one-person operation and measuring inaccessible points.
GNSS (GPS)
Global Navigation Satellite Systems include GPS, GLONASS, Galileo and BeiDou. Survey-grade receivers track signals from many satellites to compute positions.
RTK (Real Time Kinematic)
A base station on a known point sends corrections to a rover by radio or internet. The rover achieves about 1 to 2 cm horizontal and 2 to 3 cm vertical accuracy in seconds. Networks of continuously operating reference stations (CORS) can replace a local base.
Static GNSS
Receivers record for long periods, then data are post-processed for millimetre-level accuracy. Used for establishing control points over long distances.
Limitations
- Needs a clear view of the sky; poor under trees and near tall buildings.
- Multipath (signal reflection) near walls and metal surfaces.
- Heights are ellipsoidal and must be converted to local levels using a geoid model or benchmarks.
The level
Automatic and digital levels measure height differences with a staff. Levelling is the most precise way to transfer heights, used for benchmarks, floor levels, drainage falls and settlement monitoring.
Combining methods
| Task | Best method |
|---|---|
| Control over large areas | Static GNSS |
| Detail on open sites | RTK GNSS or drone |
| Detail in towns and under trees | Total station |
| Precise heights and benchmarks | Levelling |
| Setting out buildings | Total station |
| Setting out roads and earthworks | RTK GNSS and total station |
Coordinate systems in Kenya
Survey data in Kenya are commonly referenced to the Arc 1960 datum with UTM projection, or to WGS 84. Transformations between systems must be handled carefully to avoid shifts of many metres. Projects should state their coordinate and height systems clearly.
Remote methods
Drones and LiDAR add speed and coverage over large or inaccessible areas, but still rely on GNSS and total station control. See drone surveys and LiDAR.
How Quantum Geoconsultants can help
We use total stations, RTK GNSS, levels and drones, choosing the right mix for each site. See topographic surveys and topographic survey principles.
Frequently asked questions
What is the difference between GPS and GNSS?
GPS is the American satellite system. GNSS includes all systems, such as GPS, GLONASS, Galileo and BeiDou, which modern receivers use together.
How accurate is RTK GNSS?
Typically one to two centimetres horizontally and two to three centimetres vertically in good conditions.
When is a total station better than GNSS?
Under trees, near tall buildings, indoors and where millimetre precision is needed over short distances.
📐 Request a topographic survey quote
The cost of a topographic survey depends mainly on the size of the site, the level of detail needed, the ground cover and whether a drone can be used. Tell us about your site and we will recommend a method and send a quotation.
We reply with the recommended method, deliverables and a quotation. Prices are not listed online because every site is different.
Get a topographic survey quote
Send us your site location, its approximate size and what the survey is for. We will recommend ground or drone methods and send a quotation, including mobilisation from our Nairobi base.