Terrain models are the 3D backbone of modern design. Terms such as DTM, DEM and DSM are often used loosely, which causes confusion. This article explains what each means, how they are made and how they are used.
Definitions
- DEM (Digital Elevation Model): a general term for any digital representation of elevation, often a regular grid.
- DTM (Digital Terrain Model): the bare ground surface, with buildings and vegetation removed. Often includes breaklines.
- DSM (Digital Surface Model): the top surface, including buildings, trees and other objects.
Engineers usually need a DTM for ground design, while a DSM is useful for line-of-sight, solar shading and obstruction studies.
Formats
- Grid (raster): elevation values on a regular grid; efficient for large areas and GIS analysis.
- TIN: triangles joining surveyed points and breaklines; preserves exact survey points and sharp features, preferred for engineering.
- Point clouds: millions of points from drones or LiDAR, from which DTMs and DSMs are derived.
Data sources
- Ground survey (total station, GNSS): very accurate, best for small sites and hard surfaces.
- Drone photogrammetry: dense data quickly; struggles under dense vegetation.
- LiDAR: can measure ground through gaps in vegetation.
- Satellite DEMs: free or low-cost global data, typically with 10 to 30 m resolution and metre-level vertical errors; suitable for planning, not detailed design.
Creating a good DTM
- Establish control and check data accuracy.
- Classify points into ground and non-ground (vegetation, buildings).
- Add breaklines along kerbs, banks, ditches and walls.
- Build the surface and inspect it for spikes, pits and unrealistic shapes.
- Validate against independent check points.
Uses in engineering
- Contour generation
- Road and pipeline design, with sections cut from the model
- Earthwork volumes and cut and fill
- Drainage and flood modelling
- Catchment and watershed delineation
- Visualisation and 3D design
- Slope and aspect analysis for erosion and landslide studies
Accuracy matters
The model is only as good as the data and processing behind it. Vertical accuracy, point density and treatment of vegetation should be specified and reported. For flood studies in flat areas, even small errors can change results significantly.
How Quantum Geoconsultants can help
We produce DTMs and DSMs from ground, drone and LiDAR data for engineering design. See drone surveys, topographic surveys and GIS in topographic surveying.
Frequently asked questions
What is the difference between a DTM and a DSM?
A DTM represents the bare ground. A DSM includes buildings, trees and other objects on top of the ground.
What is a TIN?
A triangulated irregular network, a surface made of triangles joining surveyed points, widely used for engineering terrain models.
Can free satellite DEMs be used for design?
They are useful for planning and catchment studies but are usually too coarse and inaccurate for detailed engineering design.
📐 Request a topographic survey quote
The cost of a topographic survey depends mainly on the size of the site, the level of detail needed, the ground cover and whether a drone can be used. Tell us about your site and we will recommend a method and send a quotation.
We reply with the recommended method, deliverables and a quotation. Prices are not listed online because every site is different.
Get a topographic survey quote
Send us your site location, its approximate size and what the survey is for. We will recommend ground or drone methods and send a quotation, including mobilisation from our Nairobi base.