Drones have transformed topographic surveying. A drone survey can map a large site in hours, producing a detailed orthophoto and 3D model. This article explains how UAV photogrammetry works and how to get reliable results.
How photogrammetry works
A drone flies a planned pattern, taking overlapping photographs. Software identifies the same features in many photos and calculates their 3D positions (structure from motion). The result is a dense point cloud, from which orthophotos, DSMs and DTMs are produced.
Flight planning
- Ground sampling distance (GSD): the size of one pixel on the ground, set by camera and flying height. Smaller GSD gives more detail.
- Overlap: typically about 70 to 80 percent forward and 60 to 70 percent side overlap.
- Flight pattern: grids for mapping; oblique images for buildings and steep faces.
- Weather and light: avoid strong wind, rain and harsh shadows.
Ground control and RTK/PPK
To tie the model accurately to real-world coordinates:
- Ground control points (GCPs): marked targets surveyed with GNSS or total station.
- RTK or PPK drones: record precise camera positions, reducing the number of GCPs needed.
- Check points: independent points used only to verify accuracy.
Accuracy
With good control, accuracies of a few centimetres horizontally and slightly more vertically are achievable on hard, open surfaces. Accuracy decreases on vegetation, water, uniform surfaces such as sand and at the edges of the flight area.
Outputs
- Orthophoto: a scaled, distortion-free aerial image.
- Point cloud: millions of 3D points.
- DSM and DTM: surface and bare ground models. See DTMs and DEMs.
- Contours and volumes.
Applications
- Large building and estate sites
- Road corridors and pipeline routes
- Quarries and mines: stockpiles and pit progress
- Agriculture and irrigation planning
- Construction progress monitoring
- Flood and erosion mapping
Limitations
- Cannot see ground under dense vegetation; consider LiDAR.
- Small features such as manhole covers and kerbs need ground survey checks.
- Weather and airspace restrictions.
- Large datasets need powerful processing.
Regulations
In Kenya, drone operations are regulated by the Kenya Civil Aviation Authority, with requirements for registration, operator certification and permissions, especially near airports and restricted areas. In Somalia, permissions are agreed with relevant authorities and site owners. Professional operators handle these requirements.
Drone plus ground survey
The best results combine drone mapping for coverage with ground survey for control, hard detail and areas the drone cannot see.
How Quantum Geoconsultants can help
We fly drone surveys with RTK GNSS ground control and deliver orthophotos, models and CAD drawings. See drone surveys in Kenya and topographic surveys in Somalia.
Frequently asked questions
How accurate are drone surveys?
With good ground control or RTK/PPK, typical accuracies are a few centimetres horizontally and slightly more vertically, depending on flying height and camera.
Can drones survey under trees?
Photogrammetry cannot see the ground under dense canopy. LiDAR or ground survey is needed there.
Do drone flights need permission in Kenya?
Yes. Drone operations in Kenya are regulated by the Kenya Civil Aviation Authority, and operators must follow its registration and permit requirements.
📐 Request a topographic survey quote
The cost of a topographic survey depends mainly on the size of the site, the level of detail needed, the ground cover and whether a drone can be used. Tell us about your site and we will recommend a method and send a quotation.
We reply with the recommended method, deliverables and a quotation. Prices are not listed online because every site is different.
Get a topographic survey quote
Send us your site location, its approximate size and what the survey is for. We will recommend ground or drone methods and send a quotation, including mobilisation from our Nairobi base.