Contour lines are the most familiar way to show the shape of the land on a flat drawing. Understanding them lets anyone read a site plan and see slopes, valleys and ridges. This article explains contours, the contour interval and how elevation maps are made.
What is a contour line?
A contour line joins points of equal elevation. Imagine slicing a hill horizontally at regular heights; the edges of each slice, viewed from above, are contours. Contours are labelled with their elevation, usually in metres above a datum.
Contour interval
The contour interval is the vertical distance between adjacent contours. Every fifth contour is often drawn thicker (an index contour) and labelled.
Choosing the interval depends on:
- Terrain: steep ground needs a larger interval to avoid crowding.
- Purpose: detailed design needs smaller intervals.
- Survey accuracy: the interval should not be smaller than the data can support.
Typical values: 0.25 to 0.5 m for building plots, 0.5 to 1 m for estates and roads, 2 to 5 m or more for regional mapping.
Reading contours
- Close spacing: steep slopes.
- Wide spacing: gentle slopes or flat ground.
- Even spacing: uniform slope.
- Closed loops: hills, or depressions if marked with ticks pointing inwards.
- V-shapes pointing uphill: valleys and streams.
- V or U-shapes pointing downhill: ridges and spurs.
- Contours never cross, except at overhanging cliffs.
Calculating slope
Slope = vertical interval ÷ horizontal distance between contours. For example, 1 m contours 10 m apart give a 1 in 10 slope (10%). This helps check driveway gradients, drainage falls and road alignment.
How contours are produced
- Survey points and breaklines are collected by total station, GNSS, drone or LiDAR.
- Software builds a triangulated surface (TIN) or grid. See DTMs and DEMs.
- Contours are interpolated from the surface.
- The surveyor checks contours for errors, such as false bumps from vegetation or missing breaklines.
Breaklines along kerbs, banks and channels are essential; without them, contours cut across features unrealistically.
Spot levels
Contours show general shape, but key points such as floor levels, road crowns, manhole covers and inverts are shown as spot levels for precision.
Uses of contour maps
- Building siting and floor levels
- Road and driveway design
- Drainage and flood studies
- Dam and pond storage calculations
- Farm planning, terracing and irrigation
- Earthwork estimates
How Quantum Geoconsultants can help
We produce contour plans and terrain models for design. See contour surveys in Kenya, topographic surveys and topographic survey principles.
Frequently asked questions
What is a contour line?
A line joining points of equal elevation on a map or plan.
What contour interval should I use?
It depends on the terrain and purpose. Building plots often use 0.25 to 0.5 m, while larger sites may use 1 m or more.
What do closely spaced contours mean?
Steep ground. Widely spaced contours mean gentle slopes.
📐 Request a topographic survey quote
The cost of a topographic survey depends mainly on the size of the site, the level of detail needed, the ground cover and whether a drone can be used. Tell us about your site and we will recommend a method and send a quotation.
We reply with the recommended method, deliverables and a quotation. Prices are not listed online because every site is different.
Get a topographic survey quote
Send us your site location, its approximate size and what the survey is for. We will recommend ground or drone methods and send a quotation, including mobilisation from our Nairobi base.