Get a Quote
← All articles

Seismic Refraction Surveys for Engineering and Geological Investigations

How seismic refraction surveys measure P-wave velocities to map soil and rock layers, depth to bedrock and rippability, with field procedure, interpretation and limitations.

By Quantum Geoconsultants geophysics teamUpdated 19 November 20262 min read
TopsoilLava flowFractured lava flowWater between lava flowsOlder lavas & tuffs Resistivity survey Methods chosen for your target

📡 Geophysical Surveys: a technical article by the Quantum Geoconsultants geophysics team.

The seismic refraction survey is a classic method for mapping soil and rock layers, especially depth to bedrock and the quality of rock for excavation. It is widely used for roads, quarries, dams, pipelines and building foundations.

The principle

A seismic source, usually a sledgehammer on a steel plate, generates waves that travel into the ground. Where a faster layer lies below a slower one, part of the energy is refracted along the boundary and returns to the surface. Geophones laid out in a line record the arrival times. Beyond a certain distance, the refracted wave arrives before the direct wave, revealing the velocity and depth of the deeper layer.

Field procedure

  1. Lay out 24 or 48 geophones at regular spacing (often 2 to 5 m).
  2. Connect them to a seismograph.
  3. Fire shots at several positions: both ends, beyond the ends (offset shots) and at intervals along the line.
  4. Stack several hammer blows at each position to improve signal.
  5. Survey geophone positions and elevations.

Interpretation

First arrival times are picked from each record and plotted against distance (time-distance or travel-time plots). Straight-line segments correspond to layers, with slopes giving velocities. Methods include:

Typical P-wave velocities

Material Approximate velocity (m/s)
Dry topsoil and loose sand 200 to 800
Saturated soils about 1,500 and above
Weathered rock 1,000 to 2,500
Moderately fractured rock 2,500 to 4,000
Fresh igneous and metamorphic rock 4,000 to 6,000

Note that the water table can appear as a refractor at about 1,500 m/s, which must not be mistaken for rock.

Applications

Limitations

Combining refraction with MASW and boreholes gives a more reliable ground model.

How Quantum Geoconsultants can help

We carry out seismic refraction surveys for rock depth and rippability. See seismic refraction surveys in Kenya, geophysics for construction and rock core logging.

Frequently asked questions

What does a seismic refraction survey measure?

The travel times of seismic waves refracted along layer boundaries, from which layer velocities and depths are calculated.

What is rippability?

It is how easily rock can be excavated by a ripper on a bulldozer. Seismic velocity is a common indicator, with higher velocities usually needing heavier equipment or blasting.

When does seismic refraction not work well?

When a slower layer lies beneath a faster one (velocity inversion), or when layers are too thin to detect.

📡 Request a geophysical survey quote

The cost of a geophysical survey depends mainly on the area or length of survey lines, the methods and depth of investigation needed, and site access. Tell us about your project and we will propose a survey design and quotation.

We reply with a proposed survey design and quotation. Prices are not listed online because every site and target is different.

Plan your geophysical survey

Tell us your site, target and depth of interest. We will recommend the right methods and send a survey design and quotation.

💬 WhatsApp