Get a Quote
← All articles

Groundwater Quality Assessment: Physical, Chemical and Microbiological Parameters

What to test in borehole water: physical, chemical and microbiological parameters, common problems in East Africa such as fluoride and salinity, standards and treatment options.

By Quantum Geoconsultants hydrogeology teamUpdated 19 November 20262 min read
TopsoilLava flowFractured lava flowWater between lava flowsOlder lavas & tuffs Depth set by the survey

💧 Hydrogeology & Boreholes: a technical article by the Quantum Geoconsultants hydrogeology team.

Finding water is only half the job. The water must also be safe and suitable for its use. Groundwater quality testing checks physical, chemical and microbiological parameters. This article explains what a borehole water analysis covers and the common problems in East Africa.

Why test borehole water?

Physical parameters

Chemical parameters

Microbiological parameters

Tests for total coliforms and E. coli indicate faecal contamination. Drinking water should contain no E. coli. Contamination usually comes from poor sanitary seals, nearby latrines or unsanitary headworks rather than the aquifer itself. See sanitary sealing.

Standards

In Kenya, drinking water is assessed against the East African Standard for potable water and the WHO Guidelines for Drinking-water Quality. Irrigation and livestock have their own suitability criteria, for example based on salinity and sodium content.

Sampling correctly

Common treatment options

Problem Typical treatment
Bacteria Chlorination, UV, protecting the source
Iron and manganese Aeration and filtration
Hardness Softening
Fluoride Bone char, activated alumina, reverse osmosis
Salinity Reverse osmosis or blending

Monitoring over time

Water quality can change with pumping, for example rising salinity near the coast. Regular testing tracks trends and allows early action. See groundwater salinity in coastal areas.

How Quantum Geoconsultants can help

We sample and arrange analysis of borehole water at completion and advise on treatment. See borehole drilling, hydrogeological surveys and water quality in storage tanks.

Frequently asked questions

What should be tested in borehole water?

Physical parameters (colour, turbidity, conductivity), chemistry (fluoride, nitrate, iron, hardness, chloride, sulphate and others) and bacteria such as E. coli.

Is fluoride a problem in Kenya?

Yes, in parts of the Rift Valley and some other areas groundwater has fluoride above the 1.5 mg/L guideline, which can cause dental and skeletal fluorosis.

How often should borehole water be tested?

At completion, then regularly, at least annually for chemistry and more often for bacteria, especially for public supplies.

💧 Water demand calculator

How much water does your borehole need to deliver each day? Enter your numbers for a quick planning estimate.

0litres per day
0suggested tank (litres)
0pump flow (m³/hour, solar)

Rough planning figures only, using typical daily use per person and per animal, with one day of storage and about 6 hours of good sun. Your test pumping result sets the final pump size.

Get a borehole quote for Kenya

Send us your location. We will advise on the survey, permits, expected depth and the full cost up to a working solar borehole.

💬 WhatsApp