Foundations and infrastructure are designed for the ground they sit on. Geophysical investigation provides continuous information about that ground, helping engineers design foundations that are safe and economical across whole sites and long routes.
Buildings
- Rockhead mapping for pile lengths and raft design.
- Stiffness profiles from MASW for settlement and seismic design.
- Cavity and soft zone detection beneath footprints.
- Fault and fissure mapping in active areas.
Roads and highways
- Seismic refraction for rock depth and rippability at cuttings.
- ERT for soft or wet zones, buried channels and landslide-prone slopes.
- GPR for pavement layer thickness and voids.
Bridges
Bridge foundations often sit in river valleys with variable alluvium over rock. Geophysics maps rockhead across the crossing between boreholes, reducing the risk of piles stopping short or overrunning. Waterborne seismic or resistivity surveys may be used in rivers and lakes.
Dams and embankments
- Foundation rock quality and depth.
- Seepage paths through fractures or permeable layers.
- Condition of existing embankments: wet or weak zones.
Pipelines and linear routes
Long routes cross many ground types. Rapid geophysics identifies rock for trenching, corrosive soils and unstable ground, guiding borehole placement along the route. See surveys for pipeline routes.
Solar farms and wind turbines
- Soil resistivity for earthing system design (Wenner method).
- Thermal and electrical properties for cable sizing.
- Rock depth and stiffness for pile driving and turbine foundations.
Telecom towers and substations
Earthing resistivity surveys, along with rock and soil profiles, support safe tower foundations and electrical protection.
Water towers and tanks
Heavy, concentrated loads on small footprints need reliable bearing ground. See geotechnical investigations for water tower foundations.
Planning a geophysical investigation for infrastructure
- Define the engineering questions: rock depth, stiffness, hazards, resistivity.
- Choose methods suited to the questions and ground.
- Design lines to cross structures and expected features.
- Calibrate with boreholes and trial pits.
- Present results in engineering terms: rockhead levels, stiffness values, hazard zones.
How Quantum Geoconsultants can help
We provide geophysical investigations for buildings and infrastructure across Kenya and Somalia. See geophysical surveys for construction, seismic refraction and geotechnical surveys.
Frequently asked questions
How does geophysics help foundation design?
It maps rockhead, soft zones, cavities and stiffness across a site, so foundations can be designed for the actual ground rather than assumed conditions.
Is geophysics useful for solar farms?
Yes. Resistivity surveys give soil resistivity for earthing design, and seismic or ERT surveys help assess pile driving conditions across large sites.
Can geophysics check dams and embankments?
Yes. ERT and seismic methods can identify seepage paths, weak zones and changes in embankment and foundation materials.
📡 Request a geophysical survey quote
The cost of a geophysical survey depends mainly on the area or length of survey lines, the methods and depth of investigation needed, and site access. Tell us about your project and we will propose a survey design and quotation.
We reply with a proposed survey design and quotation. Prices are not listed online because every site and target is different.
Plan your geophysical survey
Tell us your site, target and depth of interest. We will recommend the right methods and send a survey design and quotation.