Most borehole supplies in Kenya pump into an elevated tank, which then supplies users by gravity. Integrating the two properly gives reliable water, steady pressure and efficient pumping.
How the system works
- The borehole pump lifts water to the tank on the tower.
- A level control stops the pump when the tank is full.
- Water flows by gravity from the tank to taps and outlets.
- When the level drops, the pump restarts.
Pump sizing with a tower
Total head includes lift from the borehole’s dynamic water level, the height of the tank inlet above ground, ground level differences and friction in the delivery pipe. The tower height adds directly to head. See calculating pumping head and TDH.
Matching pump to borehole and tank
- Flow within the borehole’s safe yield.
- Pumping hours that meet daily demand.
- Tank size that avoids frequent pump starts.
Level control
- Float switches: simple and widely used.
- Electrode probes: start and stop at set levels.
- Pressure or ultrasonic sensors: continuous level readings for monitoring.
- Signals are sent by cable or wireless links to the pump controller.
See control panels and protection.
Pipework
- A delivery main from the wellhead to the tank inlet, sized for low friction.
- Non-return valves to prevent backflow.
- An inlet arrangement that avoids splashing and air entrainment.
- Separate outlet main for distribution.
See pumps and pipelines for filling towers.
Solar integration
Solar pumps fill the tank during the day; the tank supplies water at night. Tank size should cover overnight use and cloudy days. See solar pumping for elevated tanks.
Water treatment
Where borehole water needs treatment, units may be placed between the borehole and tank (for example, iron removal) or after the tank (for example, chlorination or point-of-use filters). See water quality in storage tanks.
Monitoring
Flow meters on the borehole delivery, tank level indicators and pump records help manage water use and detect problems early.
How Quantum Geoconsultants can help
We design and install integrated borehole, pump and tower systems. See pump installation, solar installation and water towers.
Frequently asked questions
Does the pump need to be bigger for a water tower?
The pump must provide extra head equal to the tank height above ground, so the total head increases and pump selection must include it.
How does the pump know when the tank is full?
A float switch or level sensor in the tank signals the controller to stop the pump, and to restart it when the level drops.
Can solar pumps fill an elevated tank?
Yes. Solar pumping into an elevated tank is a very common, efficient arrangement.
🏗️ Tank and water tower calculator
Work out the tank size you need, the water pressure your tower will give at the taps, and how heavy the full tank will be. That load is what the tower foundation must carry.
Each metre of height gives about 0.1 bar of pressure. Rough planning figures only: the tower and foundation must be designed by an engineer for the tank load, wind and your ground conditions.
Send these numbers on WhatsAppGet a water tower quote
Send us your site location, tank size and the height you need. We will design the tower and foundation and send a quotation, including mobilisation from our Nairobi base.