Get a Quote
← All articles

Setting Out Works in Construction: Principles and Surveying Procedures

How construction setting out transfers designs to the ground: control, coordinates, total station and GNSS methods, profiles, levels, tolerances and independent checking.

By Quantum Geoconsultants survey teamUpdated 19 November 20262 min read
Levels, contours & 3D models

📐 Topographic & Hydrographic Surveys: a technical article by the Quantum Geoconsultants survey team.

A perfect design is useless if it is built in the wrong place. Setting out transfers the design from drawings to the ground, marking positions and levels for the builders. This article explains the principles and procedures of construction surveying.

Principles of setting out

Preparation

  1. Review drawings and resolve inconsistencies with the designer.
  2. Compute setting out coordinates and levels.
  3. Check the control points on site.
  4. Agree tolerances with the engineer or contractor.

Methods

Total station radial method

The instrument is set on a control point and oriented to another. Design coordinates are entered and the instrument guides the operator to each point. Accurate and widely used for buildings and structures.

Free station (resection)

The instrument is set up anywhere with good visibility and its position is calculated from several control points. Flexible on busy sites.

RTK GNSS

Efficient for roads, earthworks, pipelines and large open sites. Less suitable near tall structures or where millimetre precision is needed.

Levelling

Levels are transferred from benchmarks to pegs, profiles and formwork using a level or total station.

Building setting out

  1. Set out main grid lines or corners from control.
  2. Check diagonals and dimensions.
  3. Establish profiles (batter boards) outside the excavation, with lines marking walls and grids.
  4. Transfer levels for foundations, slabs and floors.
  5. Re-establish grid lines at each floor as construction rises.

Road and earthworks setting out

Machine control systems can guide graders and excavators directly from the design model. See surveys for road design.

Drainage and pipelines

Pipes need correct line and gradient. Sight rails and lasers set inverts; levels are checked frequently, because small errors can reverse falls.

Tolerances

Allowable deviations depend on the structure and specification. Building setting out typically requires accuracy of a few millimetres, while earthworks allow larger tolerances. Tolerances should be defined before work starts.

Checking and as-built surveys

Key setting out is checked before concrete is poured. After construction, as-built surveys record actual positions and levels, verifying compliance and supporting future maintenance.

How Quantum Geoconsultants can help

We provide control networks, setting out and as-built surveys for construction projects. See construction site surveys and accuracy and quality control.

Frequently asked questions

What is setting out?

Marking on the ground the exact positions and levels of structures and works shown on the design drawings.

Which instrument is best for setting out buildings?

A total station is usually preferred for buildings because of its precision. RTK GNSS is efficient for roads and earthworks on open sites.

Why must setting out be checked?

A single mistake can place a structure in the wrong position or at the wrong level, which is costly to correct. Independent checks catch errors before construction proceeds.

📐 Request a topographic survey quote

The cost of a topographic survey depends mainly on the size of the site, the level of detail needed, the ground cover and whether a drone can be used. Tell us about your site and we will recommend a method and send a quotation.

We reply with the recommended method, deliverables and a quotation. Prices are not listed online because every site is different.

Get a topographic survey quote

Send us your site location, its approximate size and what the survey is for. We will recommend ground or drone methods and send a quotation, including mobilisation from our Nairobi base.

💬 WhatsApp