A borehole is a large investment, and drilling in the wrong place can mean a dry hole, low yield or water too salty to use. A hydrogeological survey reduces that risk by studying the ground before the rig arrives. This guide explains how groundwater exploration works, from desk study to the final report.
What is a hydrogeological survey?
A hydrogeological survey is a scientific assessment of where groundwater occurs beneath a site, how deep it is, how much water a borehole might yield and what quality it is likely to be. It combines geology, existing borehole records, field observations and geophysical measurements to recommend the best drilling points.
Why a survey matters
- Reduces the risk of dry or low-yield boreholes by targeting aquifers rather than guessing.
- Sets the drilling depth, so budgets are realistic and drilling does not stop too early or go needlessly deep.
- Flags water quality risks such as salinity, fluoride or hardness.
- Meets legal requirements. In Kenya, the Water Resources Authority (WRA) requires a hydrogeological survey report before authorising drilling.
Step 1: Desk study
The hydrogeologist reviews geological maps, records of nearby boreholes (depth, yield, water level and quality), rainfall and topography, and satellite images. In Kenya, WRA and county borehole records are valuable. This shows which aquifers are likely, typical depths and known problems, such as high fluoride in parts of the Rift Valley or saline water near the coast.
Step 2: Remote sensing and terrain analysis
Satellite imagery and elevation models help identify lineaments (straight features that may be fractures or faults), drainage patterns, sand rivers and vegetation anomalies. In hard-rock areas, fractures often control where water is found. See groundwater potential in arid and semi-arid regions.
Step 3: Field reconnaissance
On site, the hydrogeologist maps rock outcrops, fracture directions, springs, wells and existing boreholes, and notes access for the drilling rig. Local knowledge from the community and existing water users is often very useful.
Step 4: Geophysical survey
The most common methods are:
- Vertical Electrical Sounding (VES): measures how resistivity changes with depth at one point, revealing layers such as clay, weathered rock and fresh rock.
- Electrical Resistivity Tomography (ERT): produces a 2D section along a line, showing fractures, weathered zones and saline water.
- Electromagnetic and magnetic profiling: quick traverses to find conductive fracture zones or dykes.
Step 5: Interpretation and recommendation
The hydrogeologist combines all the information into a conceptual groundwater model and ranks the best drilling points. The recommendation includes the expected depth to water, the recommended drilling depth, the likely yield range and the main water quality risks.
What the survey report contains
- Site location, GPS coordinates and maps of recommended drilling points
- Geology and hydrogeology of the area
- Records of nearby boreholes
- Geophysical data and interpretation
- Recommended drilling depth, expected yield and water quality
- Recommendations on drilling method, casing and screens and test pumping
In Kenya, this report accompanies the application to WRA for authorisation to drill.
Limitations
A survey greatly improves the odds of success but cannot guarantee water. Geophysics measures physical properties, not water directly, and interpretation depends on geology. That is why experienced interpretation, combined with local borehole data, matters so much.
After the survey
Once authorised, the borehole is drilled, cased, developed and test pumped. The results are reported back to WRA in a completion report. See borehole drilling procedures.
How Quantum Geoconsultants can help
Our hydrogeologists carry out surveys across Kenya and in Somalia, using VES and ERT, and prepare reports that support WRA applications. See our hydrogeological surveys in Kenya, Somalia and borehole drilling.
Frequently asked questions
What is a hydrogeological survey?
It is a study of the geology and groundwater of an area to find the best place to drill a borehole, estimate depth and yield, and identify water quality risks.
Is a hydrogeological survey required in Kenya?
Yes. The Water Resources Authority requires a hydrogeological survey report prepared by a qualified hydrogeologist before it authorises borehole drilling.
How long does a hydrogeological survey take?
Fieldwork for a single site usually takes one to two days, with the report following within a few days.
💧 Water demand calculator
How much water does your borehole need to deliver each day? Enter your numbers for a quick planning estimate.
Rough planning figures only, using typical daily use per person and per animal, with one day of storage and about 6 hours of good sun. Your test pumping result sets the final pump size.
Send these numbers on WhatsAppGet a borehole quote for Kenya
Send us your location. We will advise on the survey, permits, expected depth and the full cost up to a working solar borehole.