Get a Quote

Geophysical Survey for Construction in Kenya

Geophysical surveys for construction in Kenya: subsurface investigation, depth to bedrock, roads, bridges and dams. Seismic, MASW and ERT. Get a quote.

By Quantum Geoconsultants hydrogeology teamUpdated 15 November 20262 min read
Red residual soilWeathered rock with bouldersFresh granite / gneiss Core box Depth to bedrock varies

Before foundations are designed, geophysics maps how deep rock lies and where weak zones, boulders or voids are hidden between boreholes.

A geophysical survey for construction gives engineers a continuous picture of the ground across a whole site, not just at a few boreholes. In Kenya, where depth to rock can change sharply, black cotton soil and weathered tuffs vary in thickness, and voids or faults can hide between test points, it is one of the most cost-effective parts of a subsurface investigation.

Why use geophysics in a subsurface investigation?

A study of structural defects in Nairobi found highly variable subsoils, including expansive tuffs, soft clays and red soils containing cavities, often of variable thickness, and showed that wider site investigation significantly reduces the risk of foundation failure. Geophysics is how you widen an investigation economically: survey lines cover the whole footprint, and boreholes are then placed where they matter most.

With the National Building Code 2024 now treating geotechnical assessment as a precondition for construction, combining geophysics with our geotechnical surveys gives developers a stronger, better-documented basis for design.

Depth to bedrock surveys

Knowing how deep rock lies controls foundation type, pile lengths, excavation cost and basement design. Seismic refraction is the main tool: seismic waves travel much faster in rock than in soil, so travel times along a line of geophones reveal the rock surface. In Kenya's basement areas, refraction also helps separate large boulders from true bedrock, a common source of costly surprises.

Geophysical surveys for roads, bridges and dams

Methods we combine

Seismic refractionDepth to rock and rippability
MASWShear-wave velocity and stiffness
ERTSoil and rock layers, water, voids, faults
Boreholes & core drillingCalibrate and confirm the geophysics

What you receive

Geophysical survey cost for construction projects

The cost depends mainly on the site area or total length of survey lines, the methods and depth required and access. A single plot needs far less work than a road corridor or dam site.

Ask us for a quote. Send your site location and project details and we will propose a survey design and quotation.

Frequently asked questions

Why use geophysics for construction?

Boreholes only show the ground at single points. Geophysics fills the gaps between them, showing how depth to rock, weak zones and voids change across the whole site, so fewer surprises appear during excavation and foundation work.

How is depth to bedrock measured?

Seismic refraction is the main method: rock carries seismic waves much faster than soil, so the travel times reveal the depth to rock along each line. Resistivity and boreholes are used to confirm it.

Can geophysics be used for roads, bridges and dams?

Yes. Long road and pipeline routes are surveyed with seismic and resistivity lines; bridge and dam sites need depth to rock, weathered zones, faults and leakage paths, which geophysics maps before drilling.

How much does a geophysical survey for construction cost?

It depends on the site area or line length, the methods and depth required and access. Contact us with your project details for a quotation.

References and further reading

  1. Zohdy A. A. R., Eaton G. P. and Mabey D. R. Application of surface geophysics to ground-water investigations (USGS Techniques of Water-Resources Investigations, Book 2, Chapter D1)
  2. SurfSeis: multichannel analysis of surface waves (MASW) software and user's manual (Kansas Geological Survey)
  3. Mandatory soil test looms for developers before construction (The Standard)
  4. Subsoil conditions and structural defects in Nairobi (South Eastern Kenya University repository)
  5. Foundation soils and ground fissures along the Nairobi to Malaba railway (Frontiers in Earth Science, 2022)
  6. Barasa M. et al. (2018). Africa Groundwater Atlas: Hydrogeology of Kenya. British Geological Survey

📡 Request a geophysical survey quote

The cost of a geophysical survey depends mainly on the area or length of survey lines, the methods and depth of investigation needed, and site access. Tell us about your project and we will propose a survey design and quotation.

We reply with a proposed survey design and quotation. Prices are not listed online because every site and target is different.

Plan your geophysical survey

Tell us your site, target and depth of interest. We will recommend the right methods and send a survey design and quotation.

💬 WhatsApp