Get a Quote

MASW Survey in Kenya

MASW surveys in Kenya: shear-wave velocity profiles for ground stiffness, seismic site classification and foundation design. Get a quote for your site.

By Quantum Geoconsultants hydrogeology teamUpdated 15 November 20261 min read
TopsoilWeathered rock (regolith)Water at base of weathered zoneFractured granite / gneiss Seismic survey Shear-wave velocity profile

MASW records surface waves from a hammer blow on many geophones and turns them into a shear-wave velocity profile showing how stiff the ground is with depth.

An MASW survey in Kenya (Multichannel Analysis of Surface Waves) measures the shear-wave velocity (Vs) of the ground, a direct indicator of stiffness. It is quick, non-invasive and works where other seismic methods struggle, including soft layers beneath hard ones.

How MASW works

MASW was developed at the Kansas Geological Survey. A line of equally spaced geophones records Rayleigh-type surface waves generated by an impact source such as a sledgehammer. Because longer wavelengths reach deeper, the change of wave speed with frequency (dispersion) is inverted to give a shear-wave velocity profile with depth. A passive version uses ambient vibrations such as traffic noise to look deeper.

MASW and seismic design in Kenya

The Kenyan Rift Valley carries a medium earthquake hazard, and Kenya's seismic code has long zoned parts of the Rift into its higher-shaking zones. Modern building codes commonly use the average shear-wave velocity of the top 30 metres (Vs30) to classify sites, because softer ground amplifies shaking. MASW provides this information quickly. We recommend confirming the specific requirements of the National Building Code 2024 for your project with your structural engineer.

Other uses of MASW

What you receive

MASW survey cost in Kenya

The cost depends mainly on the number of soundings or line length, the depth required and site access.

Ask us for a quote. Send your site location and project details for a quotation.

Frequently asked questions

What is MASW?

MASW stands for Multichannel Analysis of Surface Waves. It records surface waves on a line of geophones and analyses how their speed changes with frequency to produce a shear-wave velocity (Vs) profile of the ground.

Why is shear-wave velocity important?

Shear-wave velocity is directly linked to ground stiffness. Engineers use it to assess soil and rock stiffness, foundation behaviour and how strongly the ground may amplify earthquake shaking.

Is MASW used for seismic design?

Shear-wave velocity profiles, such as the average over the top 30 metres (Vs30), are widely used for seismic site classification in modern building codes. Parts of Kenya, especially the Rift Valley, carry a medium earthquake hazard, so check your design requirements under the National Building Code 2024 with your structural engineer.

How much does an MASW survey cost?

It depends on the number of soundings or line length, the depth required and access. Contact us with your project details for a quotation.

References and further reading

  1. SurfSeis: multichannel analysis of surface waves (MASW) software and user's manual (Kansas Geological Survey)
  2. ThinkHazard: earthquake hazard, Rift Valley, Kenya (GFDRR)
  3. Seismic zoning and the Kenyan seismic code (Journal of the South African Institution of Civil Engineering)
  4. Mandatory soil test looms for developers before construction (The Standard)

📡 Request a geophysical survey quote

The cost of a geophysical survey depends mainly on the area or length of survey lines, the methods and depth of investigation needed, and site access. Tell us about your project and we will propose a survey design and quotation.

We reply with a proposed survey design and quotation. Prices are not listed online because every site and target is different.

Plan your geophysical survey

Tell us your site, target and depth of interest. We will recommend the right methods and send a survey design and quotation.

💬 WhatsApp