Get a Quote
← All articles

Borehole Water Supply Integration with Elevated Storage Tanks

How to integrate a borehole pump with an elevated storage tank: pump sizing including tower height, automatic level control, pipework, solar pumping and water treatment.

By Quantum Geoconsultants water tower teamUpdated 19 November 20262 min read
pressure QGL ◀ Nairobi TopsoilRed soil over weathered rockFoundation pads ▲ Mobilised from Nairobi

🗼 Water Towers & Storage: a technical article by the Quantum Geoconsultants water tower team.

Most borehole supplies in Kenya pump into an elevated tank, which then supplies users by gravity. Integrating the two properly gives reliable water, steady pressure and efficient pumping.

How the system works

  1. The borehole pump lifts water to the tank on the tower.
  2. A level control stops the pump when the tank is full.
  3. Water flows by gravity from the tank to taps and outlets.
  4. When the level drops, the pump restarts.

Pump sizing with a tower

Total head includes lift from the borehole’s dynamic water level, the height of the tank inlet above ground, ground level differences and friction in the delivery pipe. The tower height adds directly to head. See calculating pumping head and TDH.

Matching pump to borehole and tank

Level control

See control panels and protection.

Pipework

See pumps and pipelines for filling towers.

Solar integration

Solar pumps fill the tank during the day; the tank supplies water at night. Tank size should cover overnight use and cloudy days. See solar pumping for elevated tanks.

Water treatment

Where borehole water needs treatment, units may be placed between the borehole and tank (for example, iron removal) or after the tank (for example, chlorination or point-of-use filters). See water quality in storage tanks.

Monitoring

Flow meters on the borehole delivery, tank level indicators and pump records help manage water use and detect problems early.

How Quantum Geoconsultants can help

We design and install integrated borehole, pump and tower systems. See pump installation, solar installation and water towers.

Frequently asked questions

Does the pump need to be bigger for a water tower?

The pump must provide extra head equal to the tank height above ground, so the total head increases and pump selection must include it.

How does the pump know when the tank is full?

A float switch or level sensor in the tank signals the controller to stop the pump, and to restart it when the level drops.

Can solar pumps fill an elevated tank?

Yes. Solar pumping into an elevated tank is a very common, efficient arrangement.

🏗️ Tank and water tower calculator

Work out the tank size you need, the water pressure your tower will give at the taps, and how heavy the full tank will be. That load is what the tower foundation must carry.

0tank size (litres)
0pressure at ground taps (bar)
0weight of water when full (tonnes)

Each metre of height gives about 0.1 bar of pressure. Rough planning figures only: the tower and foundation must be designed by an engineer for the tank load, wind and your ground conditions.

Get a water tower quote

Send us your site location, tank size and the height you need. We will design the tower and foundation and send a quotation, including mobilisation from our Nairobi base.

💬 WhatsApp