Get a Quote
← All articles

Longitudinal and Cross-Sectional Surveys for Road and Drainage Design

How longitudinal and cross-sectional surveys are carried out and used in road, drainage, canal and pipeline design, including spacing, accuracy and deliverables.

By Quantum Geoconsultants survey teamUpdated 19 November 20262 min read
Levels, contours & 3D models

📐 Topographic & Hydrographic Surveys: a technical article by the Quantum Geoconsultants survey team.

Linear projects such as roads, drains, canals and pipelines are designed using two key views of the ground: the longitudinal section along the route and cross sections across it. This article explains how these surveys are done and used.

Longitudinal section (long section)

A long section shows ground levels along the centreline, plotted against chainage (distance along the route). The designer adds the proposed vertical alignment, gradients and structures.

It is used to:

Cross sections

Cross sections are profiles perpendicular to the centreline at regular intervals. They show the ground shape across the corridor and are used to design the road or channel shape, side drains and slopes, and to calculate earthwork volumes.

Survey procedure

  1. Establish control along the route. See control points and benchmarks.
  2. Peg or define the centreline and chainages.
  3. Measure levels along the centreline at regular intervals and at all changes of slope.
  4. At each cross-section station, measure levels at breaks in slope across the corridor, extending beyond the expected works.
  5. Record features: drains, culverts, kerbs, fences, services.

Total station, RTK GNSS and levelling are used, or sections are extracted from a terrain model and checked on the ground. See DTMs.

Spacing

Drainage design

For drainage, invert levels of existing pipes, culverts and outfalls are critical. A level error of a few centimetres over a flat route can mean water flows the wrong way. Surveyors must measure inverts directly where possible.

River and flood sections

For flood studies, river cross sections combine land survey of banks with bathymetric survey of the channel.

Deliverables

Using sections for volumes

Cut and fill areas on each cross section, multiplied by the distance between sections, give earthwork volumes. See earthwork volume calculations.

How Quantum Geoconsultants can help

We survey long and cross sections for roads, drains, canals and rivers. See topographic surveys, surveys for road design and flood surveys in Hirshabelle.

Frequently asked questions

What is a long section?

A profile of ground levels along the centreline of a road, drain, canal or pipeline.

How often are cross sections taken?

Commonly every 20 to 25 m on roads, and more closely at bends, junctions, culverts and changes in terrain.

Can sections be taken from a drone model?

Yes, sections can be cut from a terrain model, but critical points such as culvert inverts should be surveyed on the ground.

📐 Request a topographic survey quote

The cost of a topographic survey depends mainly on the size of the site, the level of detail needed, the ground cover and whether a drone can be used. Tell us about your site and we will recommend a method and send a quotation.

We reply with the recommended method, deliverables and a quotation. Prices are not listed online because every site is different.

Get a topographic survey quote

Send us your site location, its approximate size and what the survey is for. We will recommend ground or drone methods and send a quotation, including mobilisation from our Nairobi base.

💬 WhatsApp