Get a Quote
← All articles

LiDAR Technology in Modern Topographic and Land Surveys

How LiDAR laser scanning works from aircraft, drones, vehicles and tripods, its advantages under vegetation, accuracy, outputs and when to choose it over photogrammetry.

By Quantum Geoconsultants survey teamUpdated 19 November 20262 min read
Levels, contours & 3D models

📐 Topographic & Hydrographic Surveys: a technical article by the Quantum Geoconsultants survey team.

LiDAR (Light Detection and Ranging) measures the world with laser pulses, capturing millions of precise 3D points. It has become a key tool in topographic mapping, especially where vegetation hides the ground. This article explains how a LiDAR survey works and when to use it.

How LiDAR works

A scanner emits rapid laser pulses and measures the time for each reflection to return. Combined with precise position and orientation from GNSS and an inertial measurement unit (IMU), each return becomes a 3D point. A single pulse can produce several returns, from leaves, branches and finally the ground.

Platforms

Advantages

Processing

  1. Combine scanner data with GNSS/IMU trajectory.
  2. Calibrate and adjust strips to remove offsets.
  3. Classify points: ground, vegetation, buildings, wires.
  4. Create DTMs, DSMs, contours and features. See DTMs and DEMs.
  5. Check accuracy against ground control.

Accuracy

Vertical accuracies of a few centimetres are achievable with drone and terrestrial systems on hard surfaces. Accuracy in vegetation depends on how many pulses reach the ground. Specifications should state point density and accuracy requirements.

Applications

LiDAR or photogrammetry?

Situation Better choice
Open, bare sites Photogrammetry (cost-effective, good imagery)
Bush, forest, tall grass LiDAR
Power lines and thin structures LiDAR
Need for detailed colour orthophoto Photogrammetry, or LiDAR with a camera

See drone photogrammetry.

Limitations

How Quantum Geoconsultants can help

We advise on the best mapping technology for each site and integrate LiDAR, drone and ground survey data. See drone surveys and topographic surveys.

Frequently asked questions

What is LiDAR?

Light Detection and Ranging uses laser pulses to measure distances very rapidly, producing dense 3D point clouds of the ground and objects.

Can LiDAR see through trees?

Not through solid canopy, but laser pulses pass through gaps in foliage and some reach the ground, allowing bare-earth models in vegetated areas.

Is LiDAR better than drone photogrammetry?

It is better in vegetated areas and for complex structures, while photogrammetry is often cheaper for open sites and gives better colour imagery.

📐 Request a topographic survey quote

The cost of a topographic survey depends mainly on the size of the site, the level of detail needed, the ground cover and whether a drone can be used. Tell us about your site and we will recommend a method and send a quotation.

We reply with the recommended method, deliverables and a quotation. Prices are not listed online because every site is different.

Get a topographic survey quote

Send us your site location, its approximate size and what the survey is for. We will recommend ground or drone methods and send a quotation, including mobilisation from our Nairobi base.

💬 WhatsApp