Get a Quote
← All articles

Gravity Surveys for Geological Structure and Mineral Exploration

How gravity surveys detect density differences underground, the corrections needed to obtain Bouguer anomalies, and applications in basin mapping, faults, mineral exploration and cavity detection.

By Quantum Geoconsultants geophysics teamUpdated 19 November 20262 min read
TopsoilLava flowFractured lava flowWater between lava flowsOlder lavas & tuffs Resistivity survey Methods chosen for your target

📡 Geophysical Surveys: a technical article by the Quantum Geoconsultants geophysics team.

Gravity surveys measure tiny changes in the pull of gravity caused by differences in rock density. They are used to map sedimentary basins, faults and intrusions, to explore for dense ore bodies and, at small scale, to detect cavities. This article explains the method.

The principle

Denser rocks, such as basalt or metallic ore, pull slightly more strongly than lighter materials such as sediments or air-filled voids. These differences are extremely small, measured in milligals (mGal), where Earth’s gravity is about 980,000 mGal. Modern gravimeters can detect changes of a few microgals.

Instruments

Relative gravimeters measure differences between stations using a highly sensitive spring system. They must be calibrated and corrected for instrument drift by repeating readings at a base station.

Corrections

Raw readings change with many factors other than geology. Processing includes:

  1. Drift and tide corrections
  2. Latitude correction: gravity varies from equator to poles.
  3. Free-air correction: gravity decreases with height above a datum.
  4. Bouguer correction: removes the attraction of rock between the station and the datum.
  5. Terrain correction: accounts for nearby hills and valleys.

The result, the Bouguer anomaly, reflects density variations below. Because elevation errors cause significant gravity errors, accurate surveying of station heights, usually by RTK GNSS, is essential.

Regional and residual anomalies

Large, smooth regional trends come from deep sources. Removing them leaves residual anomalies from shallower features of interest, such as an ore body or a buried valley.

Applications

Interpretation and modelling

Gravity data are interpreted with forward modelling and inversion, using density estimates from rock samples and boreholes. Like magnetics, gravity is non-unique: a small shallow body and a large deep body can produce similar anomalies. Combining it with magnetic, seismic or drilling data reduces ambiguity.

Strengths and limitations

How Quantum Geoconsultants can help

We advise on and carry out gravity surveys as part of integrated geophysical programmes. See geophysical surveys in Kenya, mineral exploration geophysics and topographic surveys for precise station levelling.

Frequently asked questions

What does a gravity survey measure?

Tiny variations in the Earth's gravitational pull caused by differences in rock density beneath the surface.

What is a Bouguer anomaly?

It is the gravity value after corrections for latitude, elevation and the mass of rock between the station and a reference level, which highlights density changes underground.

Can gravity find cavities?

Yes. Microgravity surveys with very precise instruments can detect the mass deficit of cavities and voids at shallow depth.

📡 Request a geophysical survey quote

The cost of a geophysical survey depends mainly on the area or length of survey lines, the methods and depth of investigation needed, and site access. Tell us about your project and we will propose a survey design and quotation.

We reply with a proposed survey design and quotation. Prices are not listed online because every site and target is different.

Plan your geophysical survey

Tell us your site, target and depth of interest. We will recommend the right methods and send a survey design and quotation.

💬 WhatsApp