Borehole pumps work out of sight, so problems can grow unnoticed until the water stops. A simple borehole pump maintenance plan, based on regular monitoring, keeps systems reliable and extends their life.
Routine checks (weekly or monthly)
- Record flow meter reading and calculate daily output.
- Check delivery pressure.
- Check the control panel for faults and record run hours.
- Look for leaks at the wellhead and pipework.
- Check the tank float switch operates.
- For solar: inspect and clean panels, check mounting and cables.
Monthly or quarterly monitoring
- Static and pumping water levels through the dip tube
- Motor current on each phase and supply voltage
- Water clarity and, in coastal areas, electrical conductivity
Compare with commissioning values. See pump testing and commissioning.
Annual inspection
- Test insulation resistance of cable and motor.
- Tighten electrical connections and check for overheating.
- Test protection devices: dry-run, overload and voltage relays.
- Check earthing and surge protection.
- Inspect the wellhead seal and sanitary protection.
- Test water quality. See groundwater quality.
Warning signs
| Sign | Possible cause |
|---|---|
| Falling flow | Wear, clogging, falling water level, leaks |
| Rising current | Mechanical wear or jamming |
| Falling current with low flow | Dry running or broken shaft |
| Falling static level | Over-abstraction or drought |
| Sand in water | Screen damage or over-pumping |
| Falling insulation resistance | Cable or splice damage |
Pulling and servicing the pump
When monitoring indicates problems, or at planned intervals in demanding conditions, the pump is pulled, inspected and serviced. Worn parts are replaced, and the rising main, cable and splice are checked.
Borehole maintenance
Declining yield may be due to the borehole, not the pump. Screens and gravel packs can clog with sediment, iron deposits or bacterial growth. A camera inspection and flushing and rehabilitation can restore yield.
Keeping records
A simple logbook or digital record of readings, faults and repairs reveals trends and helps technicians diagnose problems quickly.
How Quantum Geoconsultants can help
We offer maintenance, monitoring and repair for borehole pumps and solar systems. See pump services and troubleshooting.
Frequently asked questions
How often should a borehole pump be serviced?
Routine checks should be weekly or monthly, with a detailed inspection at least annually. Pumps are pulled when monitoring shows declining performance or at planned intervals.
What should be monitored?
Flow, delivery pressure, water levels, motor current, voltage, run hours and water quality.
Can maintenance extend pump life?
Yes. Early detection of problems such as falling water levels, sand or electrical faults prevents serious damage.
⚙️ Borehole pump size calculator
Enter your borehole's numbers from the test pumping report (or your best estimate) to see the total head, the flow and roughly how big a submersible pump or solar array you need.
Rough planning figures only. Total head = pumping water level + tank height + an allowance for pipe friction. The final pump is chosen from the manufacturer's pump curves, your test pumping yield and your water quality.
Send these numbers on WhatsAppGet a borehole pump installation quote
Send us your test pumping report, borehole depth and where the tank will sit. We will size the right submersible or solar pump and send a quotation for supply, installation and commissioning.