Get a Quote
← All articles

Borehole Development: Methods, Procedures and Importance

What borehole development is, why it is essential after drilling, and how airlifting, surging, jetting and overpumping improve yield and remove sand and mud.

By Quantum Geoconsultants hydrogeology teamUpdated 19 November 20262 min read
TopsoilLava flowFractured lava flowWater between lava flowsOlder lavas & tuffs Depth set by the survey

💧 Hydrogeology & Boreholes: a technical article by the Quantum Geoconsultants hydrogeology team.

A newly drilled borehole is not ready to pump. Drilling leaves mud, fine particles and disturbed material around the screens. Borehole development (also called well development) cleans the borehole and the aquifer next to it so water flows freely. Skipping or rushing it is one of the commonest reasons for low-yield, sandy boreholes.

Why development matters

Development methods

Airlifting

Compressed air is injected through a pipe inside the casing. The rising air-water mixture lifts water, sand and mud out of the borehole. Airlifting is the most common method in East Africa because DTH rigs already have compressors. Intermittent airlifting creates surging that loosens fines.

Mechanical surging

A surge block, a plunger that fits closely in the casing, is moved up and down opposite the screens, forcing water in and out of the formation. This breaks down mud cake and bridges of fine particles. It must be done carefully to avoid damaging uPVC screens.

Jetting

High-velocity water jets are directed through the screen slots while the jetting tool is rotated and moved, cleaning the formation zone by zone. Very effective with wire-wound screens.

Overpumping and backwashing

Pumping at a higher rate than the planned production rate draws fines into the borehole for removal. Backwashing reverses flow by stopping and starting the pump. These methods are simpler but less effective on their own.

Chemical additives

Dispersants such as polyphosphates help break down clay and drilling mud. They must be used carefully and flushed out completely before the borehole is used for drinking water.

The development procedure

  1. Start gently, especially in newly gravel-packed boreholes.
  2. Work zone by zone, starting at the top screen and moving down, or as appropriate to the method.
  3. Monitor the discharge: turbidity, sand content and yield.
  4. Top up the gravel pack if it settles.
  5. Continue until water is clear and sand-free and yield is stable.
  6. Record the methods, duration and results in the completion report.

How do you know development is complete?

Development in different aquifers

Redevelopment of old boreholes

Over time, screens and gravel packs clog with sediment, iron deposits or bacterial growth, reducing yield. Redevelopment, sometimes with chemical treatment, can restore performance. A camera inspection first shows what is causing the problem. See our borehole flushing service.

How Quantum Geoconsultants can help

We develop every borehole we drill until it is clean and stable, and we rehabilitate existing boreholes. See borehole drilling, gravel packing and sealing and pumping tests.

Frequently asked questions

What is borehole development?

It is the process of cleaning a new borehole after construction to remove drilling mud and fine particles and open the aquifer around the screens.

How long does development take?

Usually several hours to a day or more, continuing until the water is clear and sand-free and the yield stabilises.

Can an old borehole be redeveloped?

Yes. Rehabilitation using similar methods, sometimes with chemical treatment, can restore yield lost to clogging.

💧 Water demand calculator

How much water does your borehole need to deliver each day? Enter your numbers for a quick planning estimate.

0litres per day
0suggested tank (litres)
0pump flow (m³/hour, solar)

Rough planning figures only, using typical daily use per person and per animal, with one day of storage and about 6 hours of good sun. Your test pumping result sets the final pump size.

Get a borehole quote for Kenya

Send us your location. We will advise on the survey, permits, expected depth and the full cost up to a working solar borehole.

💬 WhatsApp