Get a Quote
← All articles

Digital Terrain Models (DTM) and Digital Elevation Models (DEM) in Topographic Mapping

The difference between DTMs, DEMs and DSMs, how they are created from survey, drone and LiDAR data, their accuracy, and how engineers use them in design and analysis.

By Quantum Geoconsultants survey teamUpdated 19 November 20262 min read
Levels, contours & 3D models

📐 Topographic & Hydrographic Surveys: a technical article by the Quantum Geoconsultants survey team.

Terrain models are the 3D backbone of modern design. Terms such as DTM, DEM and DSM are often used loosely, which causes confusion. This article explains what each means, how they are made and how they are used.

Definitions

Engineers usually need a DTM for ground design, while a DSM is useful for line-of-sight, solar shading and obstruction studies.

Formats

Data sources

Creating a good DTM

  1. Establish control and check data accuracy.
  2. Classify points into ground and non-ground (vegetation, buildings).
  3. Add breaklines along kerbs, banks, ditches and walls.
  4. Build the surface and inspect it for spikes, pits and unrealistic shapes.
  5. Validate against independent check points.

Uses in engineering

Accuracy matters

The model is only as good as the data and processing behind it. Vertical accuracy, point density and treatment of vegetation should be specified and reported. For flood studies in flat areas, even small errors can change results significantly.

How Quantum Geoconsultants can help

We produce DTMs and DSMs from ground, drone and LiDAR data for engineering design. See drone surveys, topographic surveys and GIS in topographic surveying.

Frequently asked questions

What is the difference between a DTM and a DSM?

A DTM represents the bare ground. A DSM includes buildings, trees and other objects on top of the ground.

What is a TIN?

A triangulated irregular network, a surface made of triangles joining surveyed points, widely used for engineering terrain models.

Can free satellite DEMs be used for design?

They are useful for planning and catchment studies but are usually too coarse and inaccurate for detailed engineering design.

📐 Request a topographic survey quote

The cost of a topographic survey depends mainly on the size of the site, the level of detail needed, the ground cover and whether a drone can be used. Tell us about your site and we will recommend a method and send a quotation.

We reply with the recommended method, deliverables and a quotation. Prices are not listed online because every site is different.

Get a topographic survey quote

Send us your site location, its approximate size and what the survey is for. We will recommend ground or drone methods and send a quotation, including mobilisation from our Nairobi base.

💬 WhatsApp