BS 5930 is the British Code of practice for ground investigations, and it is one of the most widely specified documents in site investigation across Kenya, Somalia and East Africa. If a consultant’s brief says the investigation must be carried out “in accordance with BS 5930”, this is what it means in practice.
What BS 5930 covers
BS 5930 sets out good practice for every stage of a ground investigation, from the first desk study to the final report. It does not give design rules for foundations (that is the job of Eurocode 7), but it explains how to obtain reliable information about the ground so that design can be done properly. The current edition was revised to sit alongside Eurocode 7 and the BS EN ISO standards for drilling, sampling, testing and soil and rock description.
Its main topics are:
- Planning and phasing an investigation
- Desk study and site reconnaissance
- Methods of intrusive investigation: boreholes, trial pits, probing
- Sampling and sample quality
- Groundwater observations
- Field and laboratory testing
- Description and classification of soils and rocks
- Reporting: factual and interpretive information
- Health, safety and environmental considerations
Planning and phasing
A key message of BS 5930 is that ground investigation should be planned around the questions the design needs answered, not around a fixed number of boreholes. It recommends a phased approach:
- Desk study and walkover to build a first ground model and identify hazards.
- Preliminary investigation where the ground is unknown or the project is large.
- Main (design) investigation to obtain the parameters needed for design.
- Supplementary or control investigation during construction where conditions need checking.
Each phase refines the ground model, so later work is targeted where it matters most.
Desk study and site reconnaissance
Before any drilling, BS 5930 expects a review of geological maps, previous site investigation records, aerial and satellite imagery, historical land use, mining or quarrying, flooding and services. In Kenya this might include Geological Survey maps, borehole records and previous reports for nearby buildings. A walkover survey then checks access, exposures, drainage, slopes, signs of instability and damage to nearby structures. A good desk study often saves more money than any other part of the investigation.
Intrusive investigation methods
The code describes the common methods and when each is appropriate:
- Trial pits: cheap and quick, excellent for seeing the soil profile in shallow depths.
- Cable percussion boreholes: suitable for soils, allowing disturbed and undisturbed sampling and Standard Penetration Tests.
- Rotary core drilling: for rock and very stiff soils, recovering continuous core for logging.
- Dynamic probing and cone penetration testing: rapid profiling of soil resistance between boreholes.
- Geophysical surveys: mapping the ground between exploratory holes. See our geophysical surveys for construction.
Sampling and sample quality
BS 5930 links sampling to the BS EN ISO 22475-1 classes of sampling method and quality. In simple terms, the test you want to run decides the sample you need. Classification tests can use disturbed samples, but strength and consolidation tests need high-quality undisturbed samples taken with suitable tubes or core barrels. Poor sampling leads to poor parameters, however carefully the laboratory works.
Describing soils and rocks
One of the most used parts of BS 5930 is its guidance on describing soils and rocks consistently, in line with BS EN ISO 14688 and 14689. A soil description follows a set order, for example:
“Firm thinly laminated dark brown slightly sandy CLAY with rare fine gravel.”
That order (consistency or density, structure, colour, secondary and minor constituents, then the principal soil type in capitals) means anyone reading the log can picture the material. Rock descriptions follow a similar pattern covering strength, weathering, structure, colour, grain size and rock name. Read more in our article on soil classification under BS EN ISO 14688.
Groundwater
The code stresses that groundwater observations are often among the most important results of an investigation and among the easiest to get wrong. Water levels recorded during drilling may not be the true level, so it recommends recording strikes, rises over time and installing standpipes or piezometers for longer monitoring. See groundwater monitoring during geotechnical investigations.
Field and laboratory testing
BS 5930 refers to in-situ tests such as the Standard Penetration Test, plate load and permeability tests, and to laboratory testing to BS 1377 and the BS EN ISO 17892 series. The testing schedule should be chosen to provide exactly the parameters the designer needs.
Reporting
The code separates factual information (logs, test results, plans, groundwater records) from interpretation (ground model, design parameters, recommendations). Under Eurocode 7 these come together in the Ground Investigation Report. Keeping facts and interpretation distinct lets other engineers check the reasoning and reuse the data.
Why following BS 5930 matters
- It gives clients and designers confidence that the investigation is complete and reliable.
- It produces logs and reports that any engineer can read and use.
- It reduces the risk of unexpected ground conditions, claims and delays.
- It is accepted by consultants, contractors, lenders and donors across the region.
How Quantum Geoconsultants can help
We plan and carry out ground investigations to BS 5930 and Eurocode 7, from desk study and drilling to laboratory testing and interpretive reporting. Read our introduction to geotechnical site investigation, or see our geotechnical surveys in Kenya and geotechnical surveys in Somalia.
Frequently asked questions
What is BS 5930?
BS 5930 is the British code of practice for ground investigations. It covers how to plan, carry out and report site investigations for civil engineering and building works.
Is BS 5930 still used with Eurocode 7?
Yes. The current edition was revised to work alongside Eurocode 7 (BS EN 1997) and the BS EN ISO standards for sampling, testing and soil and rock description.
Does BS 5930 apply in Kenya?
It is not a Kenyan law, but it is widely specified by engineers, consultants and donors in Kenya and East Africa as the reference for good ground investigation practice.
🏗️ Request a geotechnical survey quote
The scope and cost of a geotechnical investigation depend on the size and type of structure, the site area and the ground conditions. Tell us about your project and we will propose an investigation programme and quotation.
Under the National Building Code 2024, soil testing is now expected before construction. We reply with a proposed programme and quotation.
Book a geotechnical survey in Kenya
Know your ground before you build. Send us your site location and project details and we will propose an investigation programme and quotation.