Get a Quote
← All articles

BS 1377 Explained: Essential Laboratory Tests for Soil Classification

A guide to BS 1377 soil laboratory testing: moisture content, Atterberg limits, particle size, compaction, CBR, shear strength, consolidation and chemical tests.

By Quantum Geoconsultants geotechnical teamUpdated 19 November 20263 min read
Black cotton soil: swells & shrinksFirmer weathered layerRock Core box Know your ground before you build

🏗️ Geotechnical Engineering: a technical article by the Quantum Geoconsultants geotechnical team.

Field logs describe what the soil looks like. Laboratory tests measure what it is and how it will behave. In Kenya and across East Africa, most soil testing is specified to BS 1377, Methods of test for soils for civil engineering purposes. This article explains its main parts and the tests engineers rely on.

The structure of BS 1377

BS 1377 is published in several parts:

Some tests have been superseded by the BS EN ISO 17892 series, but BS 1377 remains widely specified in the region, including for road works.

Classification tests (Part 2)

Moisture content

The simplest and most frequent test: a sample is weighed, oven-dried and weighed again. Natural moisture content compared with the Atterberg limits shows whether a clay is soft or stiff.

Atterberg limits

The liquid limit (LL) and plastic limit (PL) define the range of water content over which a fine soil behaves plastically. Their difference is the plasticity index (PI). Plotted on a plasticity chart, they classify clays and silts as low, intermediate, high or very high plasticity. Highly plastic clays, such as Kenya’s black cotton soils with liquid limits often above 70%, are prone to swelling and shrinkage.

Particle size distribution

Sieving measures the proportions of gravel and sand, and sedimentation (hydrometer or pipette) measures silt and clay. The grading curve is essential for classifying soils, assessing drainage and filters, and checking materials for fill and roads.

Particle density and linear shrinkage

Particle density is used in many other calculations. Linear shrinkage gives a quick indication of the shrink-swell potential of clays, commonly used for road materials in East Africa.

Chemical tests (Part 3)

Tests for sulphate content, chloride content, pH and organic matter show whether soil and groundwater will attack concrete and steel. They are vital on coastal sites, in gypsum-bearing ground and in saline soils found in parts of northern Kenya and Somalia.

Compaction and CBR (Part 4)

The Proctor compaction test (light or heavy) finds the maximum dry density and optimum moisture content for earthworks. The California Bearing Ratio (CBR) test measures the strength of a compacted or natural soil relative to a standard crushed stone, and is the basis of most pavement design in Kenya. CBR samples are often soaked for four days to represent wet-season conditions, and swell is recorded.

Consolidation and permeability (Parts 5 and 6)

The oedometer test loads a small disc of undisturbed soil in steps and measures how it compresses over time. It gives the coefficients needed to predict consolidation settlement and its rate. Swell tests in the oedometer measure swell pressure and heave potential of expansive clays.

Shear strength (Parts 7 and 8)

Choosing the right tests

A good testing schedule is driven by the design. A road project needs grading, Atterberg limits, compaction and CBR. A multi-storey building on clay needs strength and consolidation tests. A coastal or arid site needs chemical tests. The geotechnical engineer selects tests based on the ground model and the questions that must be answered, as recommended in BS 5930.

Quality matters

Test results are only as good as the samples and the laboratory. Undisturbed samples must be sealed and handled carefully, and laboratories should follow standard procedures, calibrate equipment and report test methods clearly.

How Quantum Geoconsultants can help

We schedule and interpret laboratory testing as part of every investigation, and turn results into practical design parameters. See soil classification under BS EN ISO 14688, bearing capacity from site investigation and our geotechnical surveys in Kenya.

Frequently asked questions

What is BS 1377?

BS 1377 is the British standard for methods of testing soils for civil engineering purposes, covering classification, chemical, compaction, strength and consolidation tests.

Has BS 1377 been replaced?

Parts of BS 1377 have been superseded by the BS EN ISO 17892 series, but BS 1377 is still widely specified in Kenya and East Africa, particularly for roads and earthworks.

Which tests are used to classify soil?

The core classification tests are moisture content, Atterberg limits (liquid and plastic limits) and particle size distribution by sieving and sedimentation.

🏗️ Request a geotechnical survey quote

The scope and cost of a geotechnical investigation depend on the size and type of structure, the site area and the ground conditions. Tell us about your project and we will propose an investigation programme and quotation.

Under the National Building Code 2024, soil testing is now expected before construction. We reply with a proposed programme and quotation.

Book a geotechnical survey in Kenya

Know your ground before you build. Send us your site location and project details and we will propose an investigation programme and quotation.

💬 WhatsApp