Get a Quote
← All articles

Solar Pump Controllers, Inverters and MPPT Technology in Groundwater Systems

How solar pump controllers and inverters work, what MPPT does, DC versus AC solar pumps, built-in protections, hybrid inputs and how to choose and install a controller.

By Quantum Geoconsultants pump installation teamUpdated 19 November 20262 min read
TopsoilLava flowOlder lavas & tuffsStatic water level (pump off) Pumping water level ◀ Submersible pump & motor ◀ Screen below the pump Pump sized from test pumping

⚙️ Borehole Pumps & Solar: a technical article by the Quantum Geoconsultants pump installation team.

The controller or inverter is the heart of a solar pumping system. It turns variable solar power into useful pumping and protects the pump. This article explains how solar pump controllers, inverters and MPPT work.

The challenge of solar power

Solar panel output changes constantly with sunlight, cloud and temperature. Each panel has a voltage and current at which it produces maximum power, and this point moves through the day. Connecting a pump directly would waste much of the available energy.

What MPPT does

Maximum Power Point Tracking continually adjusts the electrical load so the panels operate at their maximum power point. The result is more water per day from the same panels, especially in mornings, evenings and cloudy weather.

DC pump controllers

Used with DC or brushless permanent-magnet pumps, common in small and medium systems. They include MPPT, speed control and protections in one unit, and are highly efficient.

Solar pump inverters

Convert DC from the array into variable-frequency AC to drive standard AC submersible motors. Advantages include:

Built-in protections

See pump protection.

Monitoring

Displays show power, voltage, frequency and faults. Some controllers offer data logging and remote monitoring, valuable for remote sites.

Choosing a controller

  1. Match the pump type (DC or AC) and motor rating.
  2. Check the input voltage range suits the array configuration.
  3. Ensure needed protections and inputs are included.
  4. Consider hybrid capability if backup power is wanted.
  5. Choose reputable brands with local support and spares.

Installation tips

How Quantum Geoconsultants can help

We design and install solar pumping systems with suitable controllers. See borehole solar installation and solar pumping system design.

Frequently asked questions

What does MPPT mean?

Maximum Power Point Tracking. The controller continually adjusts how it draws power from the panels to get the most energy as sunlight and temperature change.

Can a solar pump inverter run a normal AC pump?

Yes. Solar pump inverters convert DC from panels to variable-frequency AC to run standard three-phase submersible pumps.

Can the controller use grid or generator power too?

Many solar pump inverters accept AC input for backup, allowing hybrid operation.

⚙️ Borehole pump size calculator

Enter your borehole's numbers from the test pumping report (or your best estimate) to see the total head, the flow and roughly how big a submersible pump or solar array you need.

0total head (m)
0pump flow (m³/hour)
0solar array (watts)

Rough planning figures only. Total head = pumping water level + tank height + an allowance for pipe friction. The final pump is chosen from the manufacturer's pump curves, your test pumping yield and your water quality.

Get a borehole pump installation quote

Send us your test pumping report, borehole depth and where the tank will sit. We will size the right submersible or solar pump and send a quotation for supply, installation and commissioning.

💬 WhatsApp