Get a Quote
← All articles

Water Storage Tank Capacity Calculations for Residential, Commercial and Industrial Projects

How to calculate water storage capacity for homes, commercial buildings, institutions and industry: demand figures, storage days, peak and fire reserves, and worked examples.

By Quantum Geoconsultants water tower teamUpdated 19 November 20261 min read
pressure QGL ◀ Nairobi TopsoilRed soil over weathered rockFoundation pads ▲ Mobilised from Nairobi

🗼 Water Towers & Storage: a technical article by the Quantum Geoconsultants water tower team.

Choosing the right tank size balances reliability against cost and structural load. This article explains how to carry out water tank capacity calculations for different types of projects.

The basic formula

Storage capacity = daily demand × days of storage + special reserves

Step 1: Estimate daily demand

User Typical planning figure
Residential (per person) 50 to 150 litres per day
Office (per employee) 20 to 50 litres per day
Day school (per pupil) 5 to 20 litres per day
Boarding school (per student) 50 to 100 litres per day
Hospital (per bed) 100 litres or more per day
Hotel (per guest) 100 to 200 litres or more per day

Industrial demand depends on processes and should come from metered data or process design. See pumping capacity.

Step 2: Days of storage

Step 3: Special reserves

Worked examples

Family home

6 people × 100 L = 600 L/day. With 1.5 days of storage: 600 × 1.5 = 900 L, so a 1,000 L tank, or larger if supply is unreliable.

Boarding school

400 students × 70 L = 28,000 L/day. With solar pumping and two days’ storage: 56,000 L, for example several large tanks or a concrete reservoir.

Small factory

Process use 15 m³/day + staff 2 m³/day = 17 m³/day; one day’s storage plus a fire reserve as required.

Converting to tank dimensions

Allow for freeboard at the top and dead storage below the outlet.

Structural implications

Every 1,000 litres weighs about one tonne. Larger elevated tanks need stronger towers and foundations. See foundation design and tower height and capacity.

Splitting storage

Large storage is often split between a ground reservoir and a smaller elevated tank, reducing tower cost while keeping reserves.

How Quantum Geoconsultants can help

We size storage, pumping and towers together. See water tower construction and tank sizing for borehole systems.

Frequently asked questions

How do I calculate tank size for my home?

Multiply the number of people by daily use per person, then by the number of days of storage you want.

Should storage include fire reserve?

For commercial and institutional buildings, fire-fighting storage may be required by regulations or insurers and is added to normal storage.

How do I convert litres to tank dimensions?

1 cubic metre equals 1,000 litres. A cylindrical tank's volume is π × radius² × height.

🏗️ Tank and water tower calculator

Work out the tank size you need, the water pressure your tower will give at the taps, and how heavy the full tank will be. That load is what the tower foundation must carry.

0tank size (litres)
0pressure at ground taps (bar)
0weight of water when full (tonnes)

Each metre of height gives about 0.1 bar of pressure. Rough planning figures only: the tower and foundation must be designed by an engineer for the tank load, wind and your ground conditions.

Get a water tower quote

Send us your site location, tank size and the height you need. We will design the tower and foundation and send a quotation, including mobilisation from our Nairobi base.

💬 WhatsApp