Get a Quote
← All articles

The Importance of Groundwater Monitoring During Geotechnical Investigations

Why groundwater levels matter in geotechnical design, how standpipes and piezometers are installed and read, and how results affect foundations, basements and excavations.

By Quantum Geoconsultants geotechnical teamUpdated 19 November 20262 min read
Black cotton soil: swells & shrinksFirmer weathered layerRock Core box Know your ground before you build

🏗️ Geotechnical Engineering: a technical article by the Quantum Geoconsultants geotechnical team.

Groundwater affects almost every part of geotechnical design, yet it is one of the easiest things to get wrong in a site investigation. A water level written on a borehole log during drilling is often not the real groundwater level. This article explains why groundwater monitoring matters and how it is done.

Why groundwater matters

Why drilling observations are not enough

During drilling, the borehole may be filled with water used for flushing, or water may seep in so slowly from clays that the level has not had time to rise. Casing may seal off water-bearing layers. Good logs record water strikes, the rise over 20 minutes and levels at the start and end of each shift, but these remain only an indication.

Monitoring installations

Standpipes

A slotted pipe surrounded by gravel over much of the borehole length. Simple and cheap, it shows the general water level but can connect different layers.

Standpipe piezometers

A filter tip is installed in sand at a chosen depth and sealed above and below with bentonite, so it measures the water pressure in one layer only. Several piezometers at different depths reveal perched water, downward drainage or artesian pressure.

Vibrating wire piezometers and loggers

Electronic sensors measure pore pressure and can be connected to data loggers to record changes continuously, useful in low-permeability clays, slopes and during construction.

Reading and recording

Levels are measured with an electric dip meter from a fixed reference point, and the reference level is surveyed. Readings are taken until levels stabilise, and then regularly, ideally covering a full wet season. In East Africa’s two rainy seasons, groundwater can rise several metres, which may control basement and excavation design.

Permeability testing

Monitoring installations can also be used for falling or rising head permeability tests, giving data for dewatering design. Larger schemes may need pumping tests, as used in groundwater investigations. See also BS EN ISO 22282 geohydraulic testing.

Water sampling

Groundwater samples are tested for sulphates, chlorides and pH to classify the aggressiveness of the environment to concrete, and sometimes for contamination on brownfield sites.

Using the results

Local examples

How Quantum Geoconsultants can help

We install standpipes and piezometers, carry out permeability tests and monitor groundwater as part of our investigations, and we bring hydrogeological expertise to interpretation. See our geotechnical surveys, hydrogeological surveys and BS 5930 guide.

Frequently asked questions

Why is the water level during drilling not reliable?

Drilling water, slow seepage into clays and sealed layers mean the level seen during drilling may not be the true groundwater level. Monitoring over days or months gives a reliable picture.

What is a standpipe piezometer?

It is a narrow pipe installed in a borehole with a filter tip sealed at a chosen depth, so the water pressure in that layer can be measured.

How long should groundwater be monitored?

At least until levels stabilise, and ideally through a wet season, because groundwater in East Africa can rise significantly during the rains.

🏗️ Request a geotechnical survey quote

The scope and cost of a geotechnical investigation depend on the size and type of structure, the site area and the ground conditions. Tell us about your project and we will propose an investigation programme and quotation.

Under the National Building Code 2024, soil testing is now expected before construction. We reply with a proposed programme and quotation.

Book a geotechnical survey in Kenya

Know your ground before you build. Send us your site location and project details and we will propose an investigation programme and quotation.

💬 WhatsApp