An ERT survey in Kenya (electrical resistivity tomography) produces a continuous 2D image of the ground along a survey line. It is one of the most versatile tools in a subsurface investigation, mapping soil and rock layers, groundwater, cavities, faults and weak zones.
How electrical resistivity tomography works
Dozens of electrodes are placed along a line and connected to a resistivity meter. Current is passed between pairs of electrodes while voltages are measured at others, in many combinations. An inversion program converts the readings into a section of true resistivity. The USGS describes direct-current resistivity, by sounding and profiling, as a standard method for subsurface investigations.
What ERT finds
- Clays and black cotton soils (low resistivity) versus sands and rock
- Depth to rock and weathered zones
- Groundwater and saline water
- Cavities in limestone (high if air-filled, low if clay-filled)
- Faults and fracture zones
- Leakage paths at dams and ponds
ERT in Kenyan ground
- Coast: screening coral limestone for cavities. See cavity detection in Mombasa.
- Rift Valley: tracing faults and fissures. See fault detection in Nakuru.
- Basement areas: mapping weathered zones and fractures for foundations and boreholes.
- Black cotton areas: mapping clay thickness across a site.
What you receive
- Inverted 2D resistivity sections with interpretation
- Maps of anomalies such as voids, faults and clay pockets
- Recommended boreholes to confirm key features
ERT survey cost in Kenya
The cost depends mainly on the number and length of survey lines, the depth required and site access.
Ask us for a quote. Send your site location and project details for a quotation.
Frequently asked questions
What is electrical resistivity tomography?
ERT is a geophysical method that injects electric current into the ground through many electrodes along a line and measures the resulting voltages. Computer inversion turns these readings into a 2D section of resistivity, revealing soil and rock layers, groundwater, cavities and faults.
How is ERT different from VES?
Vertical Electrical Sounding (VES) gives layering at a single point. ERT measures many points along a line and produces a continuous 2D image, which is better for complex or changing ground.
Can ERT find cavities?
Yes. Air-filled voids usually appear as very high resistivity and water- or clay-filled voids as low resistivity, so ERT is widely used to screen for cavities before drilling to confirm them.
How much does an ERT survey cost in Kenya?
It depends on the number and length of survey lines, the depth required and access. Contact us for a quotation.
References and further reading
- Zohdy A. A. R., Eaton G. P. and Mabey D. R. Application of surface geophysics to ground-water investigations (USGS Techniques of Water-Resources Investigations, Book 2, Chapter D1)
- USGS Geophysical Research and Development: gravity, magnetic, electrical, electromagnetic and seismic methods
- Barasa M. et al. (2018). Africa Groundwater Atlas: Hydrogeology of Kenya. British Geological Survey
📡 Request a geophysical survey quote
The cost of a geophysical survey depends mainly on the area or length of survey lines, the methods and depth of investigation needed, and site access. Tell us about your project and we will propose a survey design and quotation.
We reply with a proposed survey design and quotation. Prices are not listed online because every site and target is different.
Plan your geophysical survey
Tell us your site, target and depth of interest. We will recommend the right methods and send a survey design and quotation.