Get a Quote
← All articles

Water Quality Management and Sanitary Protection in Elevated Storage Tanks

How to keep stored water safe in elevated tanks: sealed design, screened openings, materials, cleaning and disinfection, temperature, residual chlorine and testing.

By Quantum Geoconsultants water tower teamUpdated 19 November 20261 min read
pressure QGL ◀ Nairobi TopsoilRed soil over weathered rockFoundation pads ▲ Mobilised from Nairobi

🗼 Water Towers & Storage: a technical article by the Quantum Geoconsultants water tower team.

Water can leave a borehole clean and become contaminated in storage. Good sanitary protection and maintenance of elevated tanks keep stored water safe to drink.

How stored water becomes contaminated

Design for sanitary protection

See plumbing, valves and fittings.

Temperature

Warm water encourages bacterial growth. Light-coloured or insulated tanks, shading and avoiding long storage times help keep water cooler.

Water turnover

Oversized tanks with low use can hold water for long periods, reducing quality. Size tanks sensibly and ensure regular turnover. See capacity calculations.

Cleaning

  1. Isolate and drain the tank.
  2. Remove sediment and scrub surfaces.
  3. Inspect the interior for damage.
  4. Rinse thoroughly.

Commonly every six to twelve months, more often if needed.

Disinfection

After construction, repairs or cleaning, tanks are disinfected with chlorine solution at a specified concentration and contact time, following recognised procedures for water storage facilities, then flushed and tested before return to service. Workers entering tanks must follow confined-space safety procedures.

Treatment and residual chlorine

Where water is chlorinated, maintaining a small residual chlorine level in storage helps protect against contamination. Where treatment is used for borehole water, it should be designed for the specific water quality. See groundwater quality assessment.

Testing

Public and institutional supplies need regular testing programmes.

How Quantum Geoconsultants can help

We design hygienic storage systems and advise on cleaning and testing. See water tower construction and inspection and maintenance.

Frequently asked questions

Can water become contaminated in a storage tank?

Yes. Dust, insects, birds, rodents, sediment and biofilm can contaminate stored water if tanks are poorly sealed or not cleaned.

How is a tank disinfected?

After cleaning, it is treated with a chlorine solution for a contact period according to recognised procedures, then flushed and tested before use.

Should stored water be tested?

Yes. Regular bacteriological testing, especially for public and institutional supplies, confirms the water remains safe.

🏗️ Tank and water tower calculator

Work out the tank size you need, the water pressure your tower will give at the taps, and how heavy the full tank will be. That load is what the tower foundation must carry.

0tank size (litres)
0pressure at ground taps (bar)
0weight of water when full (tonnes)

Each metre of height gives about 0.1 bar of pressure. Rough planning figures only: the tower and foundation must be designed by an engineer for the tank load, wind and your ground conditions.

Get a water tower quote

Send us your site location, tank size and the height you need. We will design the tower and foundation and send a quotation, including mobilisation from our Nairobi base.

💬 WhatsApp