Get a Quote
← All articles

Solar-Powered Pumping Systems for Elevated Water Storage Tanks

How to design solar pumping systems that fill elevated water tanks: daily volume, head including tower height, array sizing, storage for night and cloudy days, and controls.

By Quantum Geoconsultants water tower teamUpdated 19 November 20261 min read
pressure QGL ◀ Nairobi TopsoilRed soil over weathered rockFoundation pads ▲ Mobilised from Nairobi

🗼 Water Towers & Storage: a technical article by the Quantum Geoconsultants water tower team.

Combining a solar pump with an elevated tank is one of the most efficient water supply designs for homes, farms, schools and communities. The sun fills the tank by day; gravity delivers water whenever it is needed. This article explains the design.

Why solar and towers work well together

Step 1: Daily volume

Estimate daily demand. See tank capacity calculations.

Step 2: Total head

Include lift from the water source, ground level differences, tower height to the tank inlet and friction losses. See TDH and flow rate.

Step 3: Size the solar array

Hydraulic energy per day ≈ 2.725 × volume (m³) × head (m) in watt-hours. Dividing by peak sun hours and system efficiency gives the array size. For example, 15 m³/day at 60 m head needs about 2,450 Wh/day of hydraulic energy; with 5.5 sun hours and 45 percent efficiency, about 1 kW of panels, plus a margin. See solar pumping system design.

Step 4: Check the source

Peak solar flow, around midday, must not exceed the borehole’s safe yield.

Step 5: Size the tank

The tank must hold evening, night and early morning use, plus a reserve for cloudy days. Solar systems usually need more storage than grid systems.

Step 6: Controls

See solar controllers and MPPT.

Structural considerations

Larger tanks for solar storage add weight to towers. Tower and foundation design must account for the full tank. See foundation design. Panels can be mounted on separate ground frames or, where designed for it, on the tower structure.

Maintenance

How Quantum Geoconsultants can help

We design solar pumping and water towers as one system. See borehole solar installation and water tower construction.

Frequently asked questions

Is solar a good way to fill a water tower?

Yes. Solar pumps fill the tank during sunny hours and the tank provides water at night and on cloudy days, without running costs.

Does tower height affect solar array size?

Yes. A taller tower increases total head, which increases the energy needed to pump each cubic metre.

How much storage is needed with solar?

Enough for night use plus a reserve for cloudy days, commonly one to three days of demand.

🏗️ Tank and water tower calculator

Work out the tank size you need, the water pressure your tower will give at the taps, and how heavy the full tank will be. That load is what the tower foundation must carry.

0tank size (litres)
0pressure at ground taps (bar)
0weight of water when full (tonnes)

Each metre of height gives about 0.1 bar of pressure. Rough planning figures only: the tower and foundation must be designed by an engineer for the tank load, wind and your ground conditions.

Get a water tower quote

Send us your site location, tank size and the height you need. We will design the tower and foundation and send a quotation, including mobilisation from our Nairobi base.

💬 WhatsApp