Get a Quote

Borehole Drilling in Tana River County

Borehole drilling in Tana River County: river alluvium and sedimentary plains, salinity testing, WRA permits and solar pumps for Hola, Garsen and Bura.

By Quantum Geoconsultants hydrogeology teamUpdated 15 November 20263 min read
TopsoilRiver sands & gravelsSaturated sandsBedrock Set by survey

Along the Tana, water fills river sands and gravels recharged by the river; away from it, older sediments can hold salty water.

Tana River County follows Kenya's longest river through hot, dry plains to its delta. Borehole drilling in Tana River supports irrigation schemes, livestock and towns, but water quality varies with distance from the river.

Geology of Tana River County and how groundwater occurs

Most of Tana River County is covered by flat-lying sedimentary deposits: river and delta sediments, and older sands and clays. Along the Tana River, belts of alluvial sand and gravel form the best aquifers. Here water fills the spaces between grains and is recharged by the river and its floods.

Away from the river, older sediments can contain saline or mineralised water, and clay layers can make yields low. Siting boreholes on the right sand bodies, often close to present or former river channels, is key.

In short: Along the Tana, water fills river sands and gravels recharged by the river; away from it, older sediments can hold salty water.

Borehole water quality in Tana River

River-recharged alluvial water is generally the freshest. Further from the river, salinity and hardness can be high. We test salinity during drilling and in the laboratory.

Who needs a borehole in Tana River?

Irrigation schemes around Hola and Bura, livestock keepers, schools and health centres, and homes and businesses in Hola, Garsen and Madogo.

Our borehole drilling process in Tana River

  1. Hydrogeological survey. We review the local geology and nearby borehole records, then use resistivity (VES) and PQWT surveys to find thick, coarse sand and gravel layers and avoid salty sediments.
  2. Permit application. We prepare the survey report and apply to the Water Resources Authority (WRA), plus any environmental approval needed.
  3. Drilling. The borehole is drilled and the rock is logged metre by metre to record every water strike.
  4. Casing, screens and development. Screens are placed against the water-bearing zones, with a gravel pack and a sanitary seal, then the borehole is cleaned by air-lifting.
  5. Test pumping and water quality. Pumping tests set a safe yield, and a sample goes for laboratory analysis.
  6. Solar pump installation. A submersible pump and solar system are sized to the safe yield and your daily demand.
  7. Handover. You receive a completion report with logs, casing design and test results.

Borehole permits in Tana River

Every borehole in Tana River County needs authorisation from the Water Resources Authority (WRA) before drilling, supported by a hydrogeological survey report, and the borehole log and test pumping data must be returned to WRA afterwards. We handle the paperwork for you. Read more in our complete guide to borehole drilling in Kenya.

Choosing a borehole drilling company in Tana River County

Quantum Geoconsultants is a borehole drilling company offering complete water borehole services in Tana River County: the borehole survey, WRA permits, borehole drilling, casing and test pumping, borehole pump installation and solar borehole installation, all handled by one team.

Borehole drilling cost in Tana River depends mainly on the depth needed, the hardness of the rock, the casing used and the size of the pump and solar system. There is no single price, so we give every client an itemised quotation from survey to handover. When comparing borehole drilling companies, check that the quote includes the survey, permits, casing, test pumping, water testing and the pump, so there are no hidden costs later.

Areas we serve in Tana River County

We drill boreholes across Tana River County, including Hola, Garsen, Bura, Madogo, Kipini, Tarasaa, Bangale and Wenje. We also work in neighbouring Garissa, Lamu, Kilifi, Kitui, Isiolo.

Frequently asked questions

How deep are boreholes in Tana River County?

Depth depends on how thick the water-bearing sands are and how far you are from the river. A survey gives the expected depth and helps avoid salty layers.

Is borehole water in Tana River safe to drink?

Water close to the river is usually freshest; further away it can be salty or hard. We test every borehole and advise on suitable uses.

Which areas of Tana River do you cover?

We drill boreholes across Tana River County, including Hola, Garsen, Bura, Madogo, Kipini, Tarasaa, Bangale and Wenje, and throughout Kenya.

Do I need a permit to drill a borehole in Tana River?

Yes. You need authorisation from the Water Resources Authority (WRA) before drilling, supported by a hydrogeological survey report. Quantum Geoconsultants prepares and follows up the application for you.

How much does borehole drilling cost in Tana River?

Borehole drilling cost depends mainly on the depth, the rock type, the casing and the pump and solar system. Because these vary from site to site, Quantum Geoconsultants gives an itemised quotation from survey to handover. Contact us with your location for a quote.

Do you install solar borehole pumps in Tana River?

Yes. We size and install submersible pumps and solar systems matched to your borehole's tested yield and daily water demand, then commission the system and hand it over.

How do I choose a borehole drilling company in Tana River?

Choose a company that carries out a proper hydrogeological survey, handles WRA permits, gives an itemised quote to handover, tests the water and provides a borehole completion report. Quantum Geoconsultants does all of these.

💧 Water demand calculator

How much water does your borehole need to deliver each day? Enter your numbers for a quick planning estimate.

0litres per day
0suggested tank (litres)
0pump flow (m³/hour, solar)

Rough planning figures only, using typical daily use per person and per animal, with one day of storage and about 6 hours of good sun. Your test pumping result sets the final pump size.

Get a borehole quote for Tana River

Send us your location. We will advise on the survey, permits, expected depth and the full cost up to a working solar borehole.

💬 WhatsApp