Get a Quote

Borehole Camera Inspection in Tana River

Borehole camera inspection in Tana River (Hola, Garsen, Bura): downhole video survey and written report on casing, screens and yield loss.

By Quantum Geoconsultants hydrogeology teamUpdated 16 November 20263 min read
REC · LIVE VIEW Casing jointCrack in casingScreen: slots cloggedSilt at the bottom Monitor & recorder Screens & sand entry

Tana River: the camera goes down on a measured cable while the monitor records the casing, any cracks, the screens and the bottom, each logged by depth.

Borehole camera inspection in Tana River shows you exactly what is happening inside your borehole. We lower a downhole video camera on a depth-measured cable, record the casing, screens, fractures and bottom, and give you a written inspection report with the video, still images, a depth log and clear recommendations. This guide explains what the camera finds in Tana River's boreholes, how the inspection works, what the report contains and what affects the cost, including mobilisation from our Nairobi base.

When you need a borehole camera inspection in Tana River

What our camera finds in Tana River's boreholes

Boreholes in Tana River often draw from river sands and gravels. The camera shows damaged or enlarged screen slots, sand entry and how much sand has filled the borehole, and checks the screens after flushing.

Where a borehole in Tana River produces sand, the camera finds where it enters: a damaged screen, a gap at a joint or a hole in the casing.

How we carry out a camera inspection in Tana River

  1. Plan: depth, diameter, records and what you need to find out.
  2. Prepare: pull the pump and riser, and let the water settle or flush it if it is muddy.
  3. Measure the static water level and the depth to the bottom.
  4. Inspect: lower the camera slowly, recording continuously, with side views of key features.
  5. Review on site with you, then report with the video, images, depth log and recommendations.

If the water is muddy, the borehole is flushed first: see borehole flushing in Tana River. If the pump needs replacing after the inspection, see borehole pump installation in Tana River.

Your borehole inspection report

What the report contains
  • Borehole details and the date of inspection
  • Full video recording, with depth shown throughout
  • Still images of key features, labelled with depth
  • A depth-referenced log of casing, joints, screens, water level, inflow zones, damage and silt
  • A comparison with the completion record, where available
  • An overall condition assessment
  • Clear recommendations: no action, flushing, pump recovery, repair, deepening or a new borehole

Checking a new borehole in Tana River

A camera inspection compares the borehole as built with its completion record: the total depth, the casing length and type, the screen positions and the joints. It is an independent check on the drilling work, and useful evidence if a borehole fails early. Planning a new borehole? See borehole drilling in Tana River.

Borehole camera inspection cost in Tana River

The cost depends on the borehole depth, whether we need to pull and reinstall the pump, whether flushing is needed first, the level of reporting and site access.

Mobilisation from Nairobi

We are based in Nairobi, so mobilisation costs change with the distance to your site. Tana River is far from our Nairobi base, so mobilisation is a bigger share of the cost, including long-haul transport and accommodation. Mobilisation is shown separately in the quotation. Inspecting several boreholes in the same area, or combining the inspection with flushing or pump work, shares one mobilisation.

We inspect boreholes across Tana River, including Hola, Garsen, Bura, Madogo, Kipini, Tarasaa, Bangale, Wenje.

Frequently asked questions

How much does a borehole camera inspection cost in Tana River?

It depends on the borehole depth, whether the pump must be pulled, whether flushing is needed first and the level of reporting. Mobilisation from our Nairobi base is higher, as the county is far from Nairobi. Send us your borehole details for a quotation.

What does a camera inspection usually find in Tana River?

Most often damaged or enlarged screen slots, sand entry and sand filling the borehole.

Does the pump have to be removed?

Usually yes. The pump and riser pipe block the camera. We can pull and reinstall the pump as part of the job. If the pump is stuck, the camera can often be lowered beside it to see how it is jammed.

What if the water is muddy?

The camera needs clear water. A muddy borehole is left to settle or flushed first, which also often improves its yield.

What do I receive after the inspection?

The full video with depth shown, labelled still images, a depth-referenced log, a condition assessment and clear recommendations.

References and further reading

  1. US EPA: borehole video camera (environmental geophysics)
  2. USGS: geophysical and video logging, Idaho National Laboratory
  3. A closer look at southeast regional drinking water wells: identifying problems using a down-well camera (Georgia Tech repository)
  4. SSWM: well development and rehabilitation
  5. Barasa M. et al. (2018). Africa Groundwater Atlas: Hydrogeology of Kenya. British Geological Survey

📹 Is your borehole ready for a camera?

A camera inspection needs clear water and a clear path down the borehole. Answer a few questions to see what preparation is needed and what the inspection will focus on.

0readiness (%)
0preparation steps
0camera cable needed (m)

Book a borehole camera inspection in Tana River

Send us the borehole depth, diameter and what you want to find out. We will plan the inspection and send a quotation for the survey and written report, including mobilisation from our Nairobi base.

💬 WhatsApp