Get a Quote
← All articles

Design and Construction of Elevated Water Storage Tanks

How elevated water storage tanks are designed and built: loads, tower forms, steel and concrete structures, foundations, connections, access, and construction quality.

By Quantum Geoconsultants water tower teamUpdated 19 November 20262 min read
pressure QGL ◀ Nairobi TopsoilRed soil over weathered rockFoundation pads ▲ Mobilised from Nairobi

🗼 Water Towers & Storage: a technical article by the Quantum Geoconsultants water tower team.

Elevated water tanks look simple, but they carry heavy loads high above the ground and must resist wind for decades. Good design and construction make them safe and long-lasting. This article explains the key considerations.

Design loads

Both full and empty conditions are checked: full for bearing and member strength, empty for uplift and overturning under wind.

Tower forms

Steel lattice towers

Four or more legs of angle, channel or hollow sections, braced diagonally, with a platform for the tank. Quick to fabricate and erect, suitable for plastic and steel sectional tanks.

Reinforced concrete towers

Columns and beams or a shaft supporting a concrete tank. Durable and suited to large capacities and community schemes.

Masonry stands

For small tanks at low heights, sometimes economical but limited in height.

Design standards

Engineers use recognised codes for actions (including wind), steel and concrete design, and liquid-retaining structures, such as the Eurocodes or equivalent British Standards. Kenyan practice commonly follows these.

Key design checks

Construction quality

Access and safety features

Plumbing integration

Inlets, outlets, overflows and drains are planned with the structure so pipes are supported and accessible. See plumbing, valves and fittings.

How Quantum Geoconsultants can help

We design and build steel and concrete water towers with foundations based on site investigation. See water tower construction and our water tower guide.

Frequently asked questions

What loads does an elevated tank carry?

The weight of the tank and water, the self-weight of the tower, wind loads, access and maintenance loads, and in some regions earthquake loads.

Steel or concrete tower?

Steel towers are quicker to build and suit small to medium tanks. Reinforced concrete towers suit large capacities and long service life.

Who should design an elevated tank?

A qualified structural engineer, using ground investigation data for the foundations.

🏗️ Tank and water tower calculator

Work out the tank size you need, the water pressure your tower will give at the taps, and how heavy the full tank will be. That load is what the tower foundation must carry.

0tank size (litres)
0pressure at ground taps (bar)
0weight of water when full (tonnes)

Each metre of height gives about 0.1 bar of pressure. Rough planning figures only: the tower and foundation must be designed by an engineer for the tank load, wind and your ground conditions.

Get a water tower quote

Send us your site location, tank size and the height you need. We will design the tower and foundation and send a quotation, including mobilisation from our Nairobi base.

💬 WhatsApp