Corrosion and leaks are the main threats to the life of water tanks and towers. Good corrosion protection and waterproofing extend service life by many years and protect water quality.
Why corrosion matters
- Rust reduces steel member sizes, weakening towers.
- Corroded tank panels leak and contaminate water.
- Repairs at height are costly and dangerous.
Coastal areas, saline water and humid climates speed up corrosion.
Steel towers
Hot-dip galvanising
Steel is dipped in molten zinc, forming a protective coating that also protects small scratches sacrificially. It is one of the most durable protections for tower steel.
Paint systems
Primers, intermediate and top coats (such as epoxy and polyurethane systems) protect steel and can be applied over galvanising for extra life in aggressive environments.
Repair of damage
Coatings damaged during transport and erection should be repaired with suitable zinc-rich or touch-up systems.
Steel tanks
- External coatings to resist weather and UV.
- Internal linings approved for drinking water.
- Correct gaskets and sealants in sectional tanks.
- Avoid mixing metals that cause galvanic corrosion.
Concrete tanks
- Concrete designed for watertightness, with suitable cement content and low water-cement ratio.
- Adequate cover to reinforcement to prevent rusting.
- Properly detailed construction joints with waterstops.
- Waterproofing admixtures or coatings where specified.
- Careful curing to prevent cracking.
Liquid-retaining structure codes give crack width limits and detailing rules.
Plastic and GRP tanks
- UV-stabilised materials resist sunlight degradation.
- Avoid point loads that crack tanks.
- Protect fittings from stress.
Foundations
Concrete foundations in sulphate or chloride-rich soils need appropriate cement types and cover. Ground investigation identifies these conditions. See geotechnical investigations for water towers.
Inspection and maintenance
- Inspect coatings at least annually.
- Repair rust spots early.
- Check for leaks, damp patches and cracks.
- Recoat before protection fails.
See inspection and maintenance.
How Quantum Geoconsultants can help
We specify durable materials and protection systems for towers and tanks. See water tower construction and types of storage tanks.
Frequently asked questions
How are steel water towers protected from rust?
Usually by hot-dip galvanising and or protective paint systems, with damaged areas repaired promptly.
Can any paint be used inside a drinking water tank?
No. Internal linings must be approved for contact with drinking water.
How are concrete tanks made watertight?
Through good concrete design and construction, properly detailed joints, and waterproofing such as crystalline admixtures or coatings where specified.
🏗️ Tank and water tower calculator
Work out the tank size you need, the water pressure your tower will give at the taps, and how heavy the full tank will be. That load is what the tower foundation must carry.
Each metre of height gives about 0.1 bar of pressure. Rough planning figures only: the tower and foundation must be designed by an engineer for the tank load, wind and your ground conditions.
Send these numbers on WhatsAppGet a water tower quote
Send us your site location, tank size and the height you need. We will design the tower and foundation and send a quotation, including mobilisation from our Nairobi base.