Get a Quote
← All articles

Mineral Exploration: Principles, Methods and Stages of Mineral Resource Investigation

How mineral exploration progresses from desktop study to resource definition: reconnaissance, target generation, drilling, resource estimation and feasibility, with the methods used at each stage.

By Quantum Geoconsultants exploration geology teamUpdated 19 November 20262 min read
TopsoilWeathered rock (regolith)Water at base of weathered zoneFractured granite / gneiss Resistivity / IP survey Targets before drilling

⛏️ Mineral Exploration: a technical article by the Quantum Geoconsultants exploration geology team.

Mineral exploration is the search for concentrations of minerals that can be mined profitably. It is a process of narrowing down: large areas are screened cheaply, and only the most promising targets receive expensive drilling. This article explains the principles and the stages of exploration.

Principles

Stage 1: Desktop study

Review geological maps, previous exploration, mining history, artisanal workings, satellite imagery and regional geophysics. Identify prospective belts and deposit models. See remote sensing and GIS in exploration.

Stage 2: Reconnaissance

The goal is to find anomalies worth following up.

Stage 3: Target generation

Targets are ranked by size, grade potential and geological logic.

Stage 4: Target testing (first drilling)

Initial RC or diamond drilling tests whether mineralisation exists at depth and how it is controlled. Many targets end here.

Stage 5: Resource definition

Systematic drilling on closer spacing, QA/QC, density measurements and geological modelling define the size and grade of the deposit. A mineral resource estimate is prepared under a reporting code such as JORC or NI 43-101.

Stage 6: Studies and development

Scoping, pre-feasibility and feasibility studies examine mining methods, processing, infrastructure, environment, social factors and economics. Only after a positive feasibility study, permits and financing does a mine get built.

Licensing in Kenya

The Mining Act 2016 governs exploration and mining in Kenya. It provides for reconnaissance and prospecting licences for exploration, retention licences and mining licences, with environmental approvals required for significant work. In Somalia, mining regulation is handled at federal and state levels. Always confirm current requirements with the relevant authority.

Environmental and social responsibilities

Even early exploration affects land and communities. Engagement, land access agreements, careful site management and rehabilitation are essential. See environmental and social considerations.

How Quantum Geoconsultants can help

Our exploration geologists and geophysicists support projects from desktop study to drilling. See mineral exploration in Kenya, exploration geophysics and gold exploration surveys.

Frequently asked questions

How long does mineral exploration take?

From first reconnaissance to a defined resource often takes several years, and many projects never reach that stage.

What licences are needed in Kenya?

Exploration in Kenya is licensed under the Mining Act 2016, which provides for reconnaissance, prospecting and retention licences before a mining licence.

Why do most exploration projects not become mines?

Most targets turn out to be too small, too low grade or uneconomic. Staged exploration keeps spending in proportion to the evidence.

📡 Request a geophysical survey quote

The cost of a geophysical survey depends mainly on the area or length of survey lines, the methods and depth of investigation needed, and site access. Tell us about your project and we will propose a survey design and quotation.

We reply with a proposed survey design and quotation. Prices are not listed online because every site and target is different.

Plan your geophysical survey

Tell us your site, target and depth of interest. We will recommend the right methods and send a survey design and quotation.

💬 WhatsApp