In deeply weathered terrain, soil hides the bedrock. Trenching and pitting expose the rock beneath, letting geologists see mineralisation directly and take representative samples before committing to drilling.
When to trench
- Following up soil geochemical anomalies
- Testing geophysical anomalies at shallow depth
- Exposing veins and structures seen in artisanal workings
- Defining the width and orientation of mineralised zones
Planning
- Orient trenches across the strike of the expected mineralisation.
- Extend them beyond the anomaly into background.
- Agree land access and compensation with landowners and communities.
- Plan safety, spoil placement and rehabilitation.
Excavation
Trenches are dug by hand or by excavator. Hand digging can provide local employment but is slower; machines are faster but need access. Topsoil should be stockpiled separately for rehabilitation.
Safety
- Shore, bench or batter walls of deeper trenches to prevent collapse.
- Keep spoil back from the edges.
- Fence or mark open trenches.
- Do not leave trenches open longer than necessary, particularly in the rainy season.
Mapping
Trench walls and floors are cleaned and mapped at large scale, recording lithology, structure, alteration and veining. Photographs and sketches document the exposure. See geological mapping.
Channel sampling
A continuous channel of consistent width and depth is cut along the trench wall or floor, sampled in intervals that follow geology. Channel samples are more representative than grab samples. QA/QC samples are inserted as for drilling. See sampling and quality assurance.
Pitting
Pits are vertical excavations, used where trenching is impractical, to sample deeper weathering profiles, laterite or alluvial deposits. Alluvial gold and mineral sand projects often use pits to sample gravel layers.
Surveying
Trench positions, orientations and sample points are surveyed accurately so they can be included in geological models. See surveys in mining and exploration.
Rehabilitation
After mapping and sampling, trenches are backfilled with subsoil first and topsoil last, and revegetated where appropriate. Good rehabilitation maintains community trust and meets regulatory expectations. See environmental and social considerations.
How Quantum Geoconsultants can help
We plan and supervise trenching, mapping and sampling programmes. See mineral exploration and stages of exploration.
Frequently asked questions
Why dig trenches in exploration?
Trenches expose bedrock and mineralisation beneath soil cover so it can be mapped and sampled before drilling.
How deep are exploration trenches?
Usually one to three metres, enough to reach fresh or weathered bedrock. Deeper trenches need shoring or benching for safety.
Should trenches be backfilled?
Yes. Trenches should be mapped, sampled and then backfilled and rehabilitated, especially for safety of people and livestock.
📡 Request a geophysical survey quote
The cost of a geophysical survey depends mainly on the area or length of survey lines, the methods and depth of investigation needed, and site access. Tell us about your project and we will propose a survey design and quotation.
We reply with a proposed survey design and quotation. Prices are not listed online because every site and target is different.
Plan your geophysical survey
Tell us your site, target and depth of interest. We will recommend the right methods and send a survey design and quotation.